4 x 2.5'' NVMe with 4 x 2.5'' Gen 5 AnyBay backplane (liquid cooling)
Use this section to understand the cable routing for four NVMe drives for liquid cooling configuration with 4 x 2.5'' Gen 5 AnyBay backplane and one processor installed.
To connect cables for a 7mm drive backplane, refer to 7mm drive backplane.
To connect power cables for a backplane for standard 2.5-inch or 3.5-inch drives, refer to Cable routing for backplane power.
Onboard cabling of four NVMe drives for liquid cooling
Figure 1. Onboard cabling of four NVMe drives for liquid cooling
| Backplane | From | To |
|---|---|---|
| Front BP (NVMe) | 1 NVMe 0–1 | 1 PCIe 2 |
| 2 NVMe 2–3 | 2 PCIe 1 |
Give documentation feedback