Skip to main content

Install the MicroSD card

Follow the instructions in this section to install the MicroSD card.

About this task

Attention

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.

  • Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems. Place the parts on a static-protective surface.

Procedure

Install the MicroSD card.
Note

  • If replacing with a new MicroSD card, the firmware historical data and user data stored in the defective MicroSD card would be lost. After a new MicroSD card is installed, subsequent firmware update history will be saved to the new card.

  • To update firmware, refer to Updating Server Firmware section in Lenovo XClarity Controller 3.

Figure 1. Installing MicroSD card

Installing MicroSD card

  1. Place the MicroSD card into the socket.
  2. Close the socket lid.
  3. Slide the socket lid to lock position.

After you finish

  1. Install any components that you have removed:

    1. Install a PCIe adapter

    2. Install rear M.2 cage

    3. Install the 2.5-inch rear drive assembly

    4. Install the top cover

  2. Complete the parts replacement. See Complete the parts replacement.