Skip to main content

Install a super capacitor module on the M.2/riser support bracket

Use this information to install a super capacitor module.

Read the installation GuidelinesPower off the server for this taskATTENTION: Static Sensitive Device Ground package before opening

Before installing the RAID super capacitor module on the chassis, touch the static-protective package that contains the new RAID super capacitor module to any unpainted surface on the outside of the server. Then, take the new RAID super capacitor module out of the package and place it on a static-protective surface.

To install a super capacitor module, complete the following steps:

  1. Align the notches on the M.2/riser support bracket with the pins on the chassis, put the M.2/riser support bracket in place, and then fasten the screw.
    Figure 1. M.2/riser support bracket installation
    Install the M.2/riser support bracket on the chassis.

  2. Install two super capacitor module holders.
    Figure 2. Super capacitor module holder installation
    Install super capacitor module holders on the M.2/riser support bracket.

  3. Open the retention clip on a holder, put a super capacitor module into the holder, and press it down to secure it into the holder.
    Figure 3. Super capacitor module installation
    Install a super capacitor module on the M.2/riser support bracket.

After installing the super capacitor module:

  1. Connect the super capacitor module to an adapter with the extension cable that comes with the super capacitor module. See Super capacitor cable routing.

Demo video

Watch the procedure on YouTube