Front 24 x 2.5" SAS/SATA + Middle 8 x 2.5" SAS/SATA

• Cable routing to SFF 16i adapters (config. 1)

• Cable routing to CFF expander (config. 2/3)

• Cable routing to SFF 8i adapter (config. 2)

• Cable routing to CFF 16i adapter (config. 3)

Cable routing to SFF 16i adapters (config. 1)​

Figure 1. Cable routing from front backplanes to SFF 16i adapters

From	To	Cable length
1 BP1: SAS	1 16i adapter: Gen 4: C0 Gen 3: C0C1	900 mm
2 BP2: SAS	2 Gen 4: C1 Gen 3: C2C3	900 mm
3 BP3: SAS	3 16i adapter: Gen 4: C0 Gen 3: C0C1	900 mm

Figure 2. Cable routing from middle backplanes to SFF 16i adapter

From	To	Cable length
1a BP10: SAS	1 16i adapter: Gen 4: C1 Gen 3: C2C3	400/260 mm
1b BP11: SAS

Cable routing to CFF expander (config. 2/3)​

Note

Cable 5 is not needed in config. 3 (CFF EXP + CFF 16i).

Figure 3. Cable routing to CFF expander

PB: processor board

From (CFF expander)	To	Cable length
1 POWER	1 PB: EXP PWR	210 mm
2 C0	2 BP1: SAS	200 mm
3 C1	3 BP2: SAS	110 mm
4 C2	4 BP3: SAS	110 mm
5 C3	5a BP10: SAS	700/500 mm
	5b BP11: SAS

Cable routing to SFF 8i adapter (config. 2)​

Note

The location of the adapter and cable connectors on the adapter may differ from those shown in the illustration. For details, see the table below.

Figure 4. Cable routing to SFF 8i adapter

From	To	Cable length
1 CFF expander: RAID/HBA	1 8i adapter: Gen 4: C0 Gen 3: C0C1	780 mm

Cable routing to CFF 16i adapter (config. 3)​

Figure 5. Cable routing to CFF 16i adapter

2P: two processors; 1P: one processor; PB: processor board

From (CFF 16i adapter)	To		Cable length
	2P	1P
1 POWER	1a PB: RAID PWR	1a PB: RAID PWR	2P: 210 mm 1P: 300/800 mm
		1b PB: PWR 14
2a C0	2 CFF expander: RAID/HBA	2 CFF expander: RAID/HBA	150/150 mm
2b C1
3 C2	3 BP 10: SAS	3 BP 10: SAS	700 mm
4 C3	4 BP 11: SAS	4 BP 11: SAS	700 mm
5 MB (CFF INPUT)	5 PB: PCIe 4	5 PB: PCIe 4	450 mm