Skip to main content

Install an M.2 drive

Follow instructions in this section to install an M.2 drive. The procedure must be executed by a trained technician.

About this task

Attention
  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.
Firmware and driver download: You might need to update the firmware or driver after replacing a component.

Procedure

  1. Locate the M.2 drive slots on the system board.
    Figure 1. M.2 drive slots
    M.2 drive slots
    1 Slot 12 Slot 2
  2. Install the lower M.2 drive.
    1. Pull and hold the lower retainer as illustrated.
    2. Insert the M.2 drive into the lower M.2 slot at an angle of approximately 15 degrees.
    3. Pivot the other end of the M.2 drive down and slide the retainer toward the M.2 drive to secure it in place.
      Figure 2. Installing lower M.2 drive
      Installing lower M.2 drive
  3. Install upper M.2 drive.
    1. Insert the M.2 drive into the upper M.2 slot at an angle of approximately 15 degrees.
    2. Pivot the other end of the M.2 drive downward until it securely locks into place with the retainer.
    3. The upper retainer will automatically lock into position, securing the M.2 drive in place.
      Figure 3. Installing upper M.2 drive
      Installing upper M.2 drive

After you finish

  1. Reinstall the processor air baffle. See Install the processor air baffle.
  2. Reinstall the rear top cover. See Install the rear top cover.
  3. Reinstall the front top cover. See Install the front top cover.
  4. Complete the parts replacement. See Complete the parts replacement.