Skip to main content

Install the front fan control board

Follow instructions in this section to install the front fan control board. The procedure must be executed by a trained technician.

About this task

Attention
  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

Procedure

  1. Align and lower the front fan control board into the outer fan cage; then, fasten the five M3 screws (PH1, 5 x M3, 0.9 newton-meters, 8 inch-pounds) to secure the front fan control board.
    Figure 1. Front fan control board installation
    Front fan control board Installation
  2. Install the inner fan cage.
    1. Lower the inner fan cage into the outer fan cage. Ensure the three screw holes on the inner fan cage are aligned with the corresponding screw holes on the outer fan cage.
      Figure 2. Inner fan cage installation
      Inner fan cage installation
    2. Fasten the five screws to secure the inner fan cage.
      Figure 3. Securing the inner fan cage
      Securing the inner fan cage

After you finish

  1. Reinstall the fan cage. See Install the fan cage (trained technician only).
  2. Reinstall all the front fans. See Install a front fan.
  3. Reinstall the front top cover. See Install the front top cover.
  4. Complete the parts replacement. See Complete the parts replacement.