Skip to main content

Removing the operator information panel assembly

Use this information to remove the operator information panel assembly.

To remove the operator information panel, complete the following steps:

  1. Read the safety information and installation guidelines, see Safety and Installation guidelines.
  2. Turn off the server (see Turning off the server) and all attached peripheral devices. Disconnect all power cords; then, disconnect all external cables as necessary to replace the device.
  3. Slide the server out of the rack.
  4. Remove the server cover (see Removing the server top cover).
  5. Disconnect the cable from the rear of the operator information panel assembly.
  6. Lift the two release tabs on the rear of the operator information panel and carefully slide the assembly out of the front of the server.
    remove operator info panel assembly
  7. If you are instructed to return the operator information panel assembly, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.