Skip to main content

Replacing the operator information panel assembly

Use this information to replace the operator information panel assembly.

To install the operator information panel, complete the following steps:

  1. Read the safety information and installation guidelines, see Safety and Installation guidelines.
  2. From the front of the server, align the panel with the slot and slide the operator information panel into the server until it clicks into place.

    replace operator info panel assembly

  3. Reconnect the cable to the rear of the operator information panel assembly.
    Note
    Make sure that cable is installed correctly by using the keys on the connector and the keys on the cable. Incorrect installation of the cable can damage the operator information panel.
  4. Install the cover (see Replacing the server top cover).
  5. Slide the server into the rack.
  6. Reconnect the power cords and any cables that you removed.
  7. Turn on the peripheral devices and the server.