Skip to main content

Install rear M.2 backplane

Follow the instructions in this section to install the rear M.2 backplane.

About this task

Attention

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.

  • Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems. Place the parts on a static-protective surface.

Procedure

  1. Install the rear M.2 backplane to the M.2 cage.
    Figure 1. Installing M.2 backplane

    1. Place the backplane on the cage and slide it as illustrated above to engage it.
    2. Tighten one screw to secure it to the cage.
  2. Install all rear M.2 adapter and drive assemblies, see Install rear hot-swap M.2 interposer and drive assembly.
  3. Connect all cables to the M.2 backplane.
  4. Install the M.2 cage back into the chassis, see Install rear M.2 cage.
  5. Install the top cover, see Install the top cover.
After you finish
  1. Complete the parts replacement. See Complete the parts replacement.

  2. Use the Lenovo XClarity Provisioning Manager to configure the RAID. For more information, see: Lenovo XClarity Provisioning Manager portal page.