ConnectX-8 InfiniBand adapter cable routing
Follow the instructions in this section to learn how to do cable routing for the aux cables of ConnectX-8 InfiniBand adapters.
According to the configuration, see the corresponding section for the ConnectX-8 adapter aux cable routing:
One ConnectX-8 adapter with one processor installed
 | ||
| From | To (processor board) | Cable length |
| 1 ConnectX adapter on Riser assembly 2 | 1a PCIe connector 9A | 300 mm |
| 1b PCIe connector 9B | ||
One ConnectX-8 adapter with two processors installed
 | ||
| From | To (processor board) | Cable length |
| 1 ConnectX adapter on Riser assembly 2 | 1a PCIe connector 15A | 300 mm |
| 1b PCIe connector 15B | ||
Two ConnectX-8 adapters with two processors installed
 | ||
| From | To (processor board) | Cable length |
| 1 ConnectX adapter on Riser assembly 2 | 1a PCIe connector 9A | 300 mm |
| 1b PCIe connector 9B | ||
| 2 ConnectX adapter on Riser assembly 3 | 2a PCIe connector 15A | 300 mm |
| 2b PCIe connector 15B | ||
Give documentation feedback