Removing a hot-swap ac power supply
Use this information to remove a hot-swap ac power supply.
When you remove or install a hot-swap power supply, observe the following precautions.
Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician.
To remove a hot-swap ac power supply, complete the following steps:
- Read the safety information that begins on Safety and Installation guidelines.
- If only one power supply is installed, turn off the server and peripheral devices and disconnect all power cords.
- If the server is in a rack, at the back of the server, pull back the cable management arm to gain access to the rear of the server and the power supply.
- Press and hold the release tab to the left. Grasp the handle and pull the power supply out of the server. Figure 1. Power supply removal
If you are instructed to return the power supply, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.