Replacing the security bezel

Use this information to replace the security bezel.

Note

Installation of the security bezel is to limit access for increased security.

To replace the security bezel, complete the following steps:

1. Read the safety information that begins on Safety and Installation guidelines.
2. If necessary, turn off the server and peripheral devices and disconnect the power cords and all external cables.
3. Carefully insert the two tabs on the security bezel into the slots along the right side of the chassis.
4. Press the release latch and rotate the security bezel until the other side clicks into place on the chassis.
   Figure 1. Security bezel installation
   

   

   
   
5. Use the key to lock the security bezel to the closed position.
   Figure 2. Locking the security bezel
   

   

   
   
6. Reconnect the power cords and any cables that you may have removed.
7. Turn on the peripheral devices and the server.