Skip to main content

Removing the cover

Use this information to remove the cover.

To remove the server cover, complete the following steps:

  1. Read the safety information that begins on page Safety and Installation guidelines.
  2. Turn off the server and peripheral devices and disconnect the power cords and all external cables, if necessary.
  3. If the server has been installed in a rack, slide the server out from the rack enclosure.
    Figure 1. Cover removal
    Cover removal
  4. Pull up firmly on the blue latch on the top (in the center of the front of the server) of the cover and slide the cover toward the rear of the server until the cover has disengaged from the chassis.
  5. Lift the server cover off the server and set it aside.
    Attention
    For proper cooling and airflow, replace the server cover before you turn on the server.