Skip to main content

Install the RAID flash power module on the air baffle

Use this information to install the RAID super capacitor module on the air baffle.

About this task

Attention
  • Read Installation guidelines to ensure that you work safely.

  • Power off the server and disconnect all power cords for this task.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

Procedure

  1. Touch the static-protective package that contains the RAID super capacitor module to any unpainted surface on the outside of the server. Then, take the RAID flash power module out of the package and place it on a static-protective surface.
  2. Install the RAID super capacitor module on the air baffle.
    Figure 1. Installation of the RAID flash power module on the air baffle
    Installation of the RAID flash power module on the air baffle

    1. Open the retention clip on the holder.
    2. Put the RAID flash power module into the air baffle and press it down to secure it into the air baffle.

After you finish

  1. Install the air baffle on the chassis. See Install the air baffle.

  2. Connect the super capacitor module to an adapter with the extension cable that comes with the super capacitor module. See RAID flash power modules.

Demo video

Watch the procedure on YouTube