System-board-assembly connectors for cable routing
The following illustrations show the internal connectors on the system board assembly that are used for internal cable routing.
Figure 1. System-board-assembly connectors
| 1 Backplane 12 power connector | 2 Backplane 11 power connector |
| 3 Backplane 10 power connector | 4 Backplane 9 power connector |
| 5 Backplane 8 power connector | 6 Backplane 7 power connector |
| 7 Backplane 6 power connector | 8 Backplane 5 power connector |
| 9 Backplane 4 power connector | 10 Backplane 3 power connector |
| 11 Backplane 2 power connector | 12 Backplane 1 power connector |
| 13 Intrusion switch connector | 14 Power distribution board sideband connector |
| 15 Leakage sensor connector | 16 Front panel USB connector |
| 17 Serial port connector |
Give documentation feedback