Install a super capacitor module on the air baffle

Use this information to install a super capacitor module on the air baffle (standard air baffle or air baffle for GPU).

Read the installation Guidelines

Power off the server for this task

ATTENTION: Static Sensitive Device Ground package before opening

Before installing the RAID super capacitor module, touch the static-protective package that contains the new RAID super capacitor module to any unpainted surface on the outside of the server. Then, take the new RAID super capacitor module out of the package and place it on a static-protective surface.

To install a super capacitor module, complete the following steps:

Figure 1. Super capacitor installation on the air baffle

1. Open the retention clip on a holder.
2. Put a super capacitor module into the holder.
3. Press it down to secure it into the holder.
4. Connect the super capacitor module to an adapter with the extension cable that comes with the super capacitor module. See RAID super capacitor modules.