Install a super capacitor module on the middle 2.5-inch drive cage
Use this information to install a super capacitor module the middle 2.5-inch drive cage.
Touch the static-protective package that contains the new RAID super capacitor module to any unpainted surface on the outside of the server. Then, take the new RAID super capacitor module out of the package and place it on a static-protective surface.
- Open the drive cage handle.
- Remove the metal cover.
Pull out the blue plunger.
Slide the metal cover out of the drive cage.
To install a super capacitor module, complete the following steps:
- Put a super capacitor module into the holder, and press it down to secure it into the holder.
- Align the pins on the super capacitor cover with the holes in the super capacitor holder, pull out the blue latch on the cover, and slide the cover into the holder until the pins pass through the holes. Then, release the blue latch to lock the cover into place.
- Connect the super capacitor module to an adapter with the extension cable that comes with the super capacitor module. See RAID super capacitor modules.