Skip to main content

Thermal rules for the server with 9005 series processors

This topic provides thermal rules for the server with 9005 series processors.

Note

  • The maximum supported DIMM quantity is 12.

  • cTDP is short for Configurable Thermal Design Power. It refers to the maximum supported power of a processor.

  • System performance may be impacted when the operating temperature is above 35 °C.

  • When a 10 x 2.5" AnyBay backplane is used, only the following two configurations support closed loop heat sink:

    • 10 x 2.5" NVMe (Gen 4)

    • 8 x 2.5" NVMe (Gen 5)

Processor groups are defined as follows:

  • Group B: 200 W ≤ cTDP ≤ 240 W

  • Group A: 240 W < cTDP ≤ 300 W

  • Group E: 320 W ≤ cTDP ≤ 400 W

Heat sink types and fan types in the tables are abbreviated as follows:

  • Air cooling heat sink: AC

  • Closed loop heat sink: CL

  • Performance fan: P

  • Standard fan: S

Standard configurations: server models with front drive bays only​

This section provides thermal information for server models with front drive bays only.

Front baysMax. Ambient Temp. (at sea level)Processor group (A, B, E)Heat sinkFan type

  • 10 x 2.5" NVMe

  • 10 x 2.5" AnyBay

  • 10 x 2.5" SAS/SATA

  • 8 x 2.5'' SAS/SATA

  • 6 x SAS/SATA + 4 x AnyBay

  • 6 x SAS/SATA + 2 x AnyBay + 2 x NVMe

35°CBAC/CLS/P
35°CAAC/CLP
25°CE (except 9575F)ACP
30°CECLP
40°CAACP
45°CBACP

16-EDSFF

30°CA, BACP

Using 10 x 2.5'' chassis

  • 4 x 2.5'' SAS/SATA

  • 4 x 2.5'' NVMe

  • 4 x 2.5'' AnyBay

35°CA, BAC/CLP
25°CE (except 9575F)ACP
30°CECLP
40°CAACP
45°CBACP

Using 4 x 2.5'' chassis

  • 4 x 2.5'' SAS/SATA

  • 4 x 2.5'' NVMe

  • 4 x 2.5'' AnyBay

35°CA, BACP
25°CE (except 9575F)ACP
40°CAACP
45°CBACP

Storage configurations: server models with rear bays​

This section provides thermal information for the storage configuration when rear drives (except 7mm drives) are installed.

Front bays

Max. Ambient Temp.

(at sea level)

Processor group

Heat sinkFan type

  • 10 x 2.5" SAS/SATA

  • 10 x 2.5" NVMe

  • 6 x 2.5" SAS/SATA + 4 x 2.5" AnyBay

  • 16-EDSFF

  • 4 x 2.5'' SAS/SATA

  • 4 x 2.5'' NVMe

  • 4 x 2.5'' AnyBay

30°CA, BACP
25°CE (except 9575F)ACP
Note

  • To support rear 2 x 2.5" SAS/SATA or NVMe (U.2/U.3) drives, the following conditions need to be met:

    • Gen 4 low-profile riser installed in Riser 1

    • No Riser 2 installed

    • No 7mm drives

    • No PCIe adapter installed in slot 2 and slot 3

  • 10 x 2.5" AnyBay front backplanes support rear NVMe (U.2/U.3) drives but do not support rear SAS/SATA drives.

GPU configurations: server models with GPU adapters​

This section provides thermal information for the GPU configuration.

The server supports the following GPUs:
  • Low-profile, half-length, single-wide:

    • NVIDIA® A2

    • NVIDIA® L4

Note

  • All GPU configurations require performance fans.

Front bays

Max. Ambient Temp.

(at sea level)

Processor group

Heat sinkMax. GPU Qty.Supported GPU installation slot (s)

  • 10 x 2.5" AnyBay

  • 10 x 2.5" NVMe

  • 10 x 2.5" SAS/SATA

  • 8 x2.5'' SAS/SATA

  • 6 x 2.5" SAS/SATA + 4 x 2.5" AnyBay

  • 6 x 2.5" SAS/SATA + 2 x 2.5" AnyBay + 2 x 2.5" NVMe

30°CA, BAC/CL31, 2, 3
25°CE (except 9575F)AC11

16-EDSFF

30°CA, BAC31, 2, 3
25°CE (except 9575F)AC11

Using 10 x 2.5'' chassis

  • 4x2.5'' SAS/SATA

  • 4x2.5'' NVMe

  • 4 x 2.5'' AnyBay

35°CA, BAC31, 2, 3
25°CE (except 9575F)AC31, 2, 3
30°CECL31, 2, 3

Using 4 x 2.5'' chassis

  • 4 x 2.5'' SAS/SATA

  • 4 x 2.5'' NVMe

  • 4 x 2.5'' AnyBay

30°CBAC31, 2, 3
35°CAAC11
25°CE (except 9575F)AC11

Thermal rules for DIMMs​

The following provides thermal information when ThinkSystem 128GB TruDDR5 4800MHz (4Rx4) 3DS RDIMM-A is installed.

Front bays

Max. Ambient Temp.

(at sea level)

Processor group

Heat sinkFan type

  • 10 x 2.5" AnyBay

  • 10 x 2.5" NVMe

  • 10 x 2.5" SAS/SATA

  • 8 x 2.5'' SAS/SATA

  • 6 x 2.5" SAS/SATA + 4 x 2.5" AnyBay

  • 6 x 2.5" SAS/SATA + 2 x 2.5" AnyBay + 2 x 2.5" NVMe

30°CA, BAC/CLP
25°CEACP
30°CECLP
40°CAACP
45°CBACP

16-EDSFF

30°CA, BACP

Using 10 x 2.5'' chassis

  • 4 x 2.5'' SAS/SATA

  • 4 x 2.5'' NVMe

  • 4 x 2.5'' AnyBay

35°CA, BAC/CLP
25°CE (except 9575F)ACP
30°CECLP
40°CAACP
45°CBACP

Using 4 x 2.5'' chassis

  • 4 x 2.5'' SAS/SATA

  • 4 x 2.5'' NVMe

  • 4 x 2.5'' AnyBay

35°CA, BACP
25°CE (except 9575F)ACP
40°CAACP
45°CBACP

The following provides thermal information when ThinkSystem 256GB TruDDR5 4800MHz (8Rx4) 3DS RDIMM-A v1 is installed.

Note
ThinkSystem 256GB TruDDR5 4800MHz (8Rx4) 3DS RDIMM-A v1 is not supported when rear drives (except 7mm drives), GPU adapters or PCIe/OCP adapters (≥ 100GB) are installed.
Front bays

Max. Ambient Temp.

(at sea level)

Processor group

Heat sinkFan type

  • 10 x 2.5" AnyBay

  • 10 x 2.5" NVMe

  • 10 x 2.5" SAS/SATA

  • 8 x 2.5'' SAS/SATA

  • 6 x 2.5" SAS/SATA + 4 x 2.5" AnyBay

  • 6 x 2.5" SAS/SATA + 2 x 2.5" AnyBay + 2 x 2.5" NVMe

30°CA, BACP
25°CA, BCLP
30°CECLP

16-EDSFF

30°CA, BACP

Using 10 x 2.5'' chassis

  • 4 x 2.5'' SAS/SATA

  • 4 x 2.5'' NVMe

  • 4 x 2.5'' AnyBay

30°CA, BACP
25°CA, BCLP
30°CECLP

Using 4 x 2.5'' chassis

  • 4 x 2.5'' SAS/SATA

  • 4 x 2.5'' NVMe

  • 4 x 2.5'' AnyBay

25°CA, BACP

Thermal rules for server models installed with PCIe/OCP adapters (≥ 100 GB)​

  • AOC: active optical cables

  • DAC: direct attach cables

Note

Performance fans are needed for the following conditions.

Front baysMax. Ambient Temp. (at sea level)ProcessorHeat sinkMax. PCIe/OCP QtySuggested slotsCable supported

  • 10 x 2.5" AnyBaynote

  • 10 x 2.5" NVMe

  • 10 x 2.5" SAS/SATA

  • 8 x 2.5'' SAS/SATA

  • 6 x 2.5" SAS/SATA + 4 x 2.5" AnyBay

  • 6 x 2.5" SAS/SATA + 2 x 2.5" AnyBay + 2 x 2.5" NVMe

30°CA, BAC31, 2, 3AOC/DAC
25°CA, BCL31, 2, 3AOC/DAC
25°CE (except 9575F)AC/CL31, 2, 3without 100G AOC
16-EDSFF30°CA, BAC31, 2, 3AOC/DAC
25°CE (except 9575F)AC31, 2, 3without 100G AOC

Using 10 x 2.5'' chassis

  • 4 x 2.5'' SAS/SATA

  • 4 x 2.5'' NVMe

  • 4 x 2.5' AnyBay

30°CA, BAC31, 2, 3AOC/DAC
25°CA, BCL31, 2, 3AOC/DAC
25°CE (except 9575F)AC/CL31, 2, 3without 100G AOC

Using 4 x 2.5'' chassis

  • 4 x 2.5'' SAS/SATA

  • 4 x 2.5'' NVMe

  • 4 x 2.5'' AnyBay

30°CA, BAC51, 2, 3, 4, 5AOC/DAC
25°CE (except 9575F)AC51, 2, 3, 4, 5without 100G AOC

Fan locations and supported quantity for different configurations​

The supported fan quantity and suggested installation slots vary with different configurations. See the following table for details.

ConfigurationsLimiting conditionsFan quantityFan typeFan locations (slots)Fan dummy quantity

  • 16-EDSFF

  • 4 x 2.5'' SAS/SATA

  • 4 x 2.5'' NVMe

  • 4 x 2.5' AnyBay

N/A7P1, 2, 3, 4, 5, 6, 71

  • 10 x 2.5" AnyBay

  • 10 x 2.5" NVMe

  • 10 x 2.5" SAS/SATA

  • 8 x 2.5'' SAS/SATA

  • 6 x 2.5" SAS/SATA + 4 x 2.5" AnyBay

  • 6 x 2.5" SAS/SATA + 2 x 2.5" AnyBay + 2 x 2.5" NVMe

  • cTDP ≤ 240 W

  • No GPU adapter

  • No rear backplane

  • No PCIe/OCP adapter (≥ 100 GB)

6S1, 2, 3, 4, 5, 62
Other scenarios except the above6P1, 2, 3, 4, 5, 62