Removing a simple-swap hard disk drive

Use this information to remove a simple-swap hard disk drive.

To remove a simple-swap hard disk drive, complete the following steps:

1. Read the safety information that begins in Safety, Handling static-sensitive devices and Installation guidelines.
2. Turn off the server (see Turning off the server) and all attached peripheral devices. Disconnect all power cords; then, disconnect all external cables as necessary to replace the device.
3. Remove the filler panel from the front of the server.
4. Locate the release tab (blue) on the hard disk drive; then, while you press the release tab to the right, grasp the handle and pull the drive out of the bay.
   
   
5. If you are instructed to return the drive, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.