Skip to main content

Replacing the media cage

Use this information to replace the media cage.

To install the media cage, complete the following steps:

  1. Install the front USB and video connector assembly into the media cage (see Replacing the front USB and video connector assembly inside media cage).
  2. Install the operator information panel into the media cage (see Replacing the operator information panel.)
  3. Install the CD/DVD drive into the media cage (see Replacing a CD/DVD drive).
  4. Carefully push the media cage back into the server.

  5. Tighten the thumbscrew to secure the media cage onto the server.

  6. Reconnect the USB, video, CD/DVD and operator information cables to the system board. Remember to insert the cables into the relevant cable clips and cable tie.



  7. Install the air baffle (see Replacing the air baffle).
  8. Install the PCI riser-card assembly (see Replacing a PCI riser-card assembly).
  9. Install the server top cover (see Replacing the server top cover).
  10. Reconnect the power cord and any cables that you removed.
  11. Turn on the peripheral devices and the server.