00015B07 : Boot mode for node in node bay [arg1] set to [arg2] by user ID [arg3] from [arg4] at IP address [arg5].
Boot mode for node in node bay [arg1] set to [arg2] by user ID [arg3] from [arg4] at IP address [arg5].
The specified user set the boot mode to the new setting for the specified node. Boot mode typically allows the user to set the system to boot from temporary or permanent side of the firmware bank.
Severity
Informational
Alert Category
Nodes (Informational)
Log Source
Node_07
Serviceable
No
Recoverable
No
Chassis LED that is Lit
None
SNMP Trap ID
mmTrapBladeS
Automatically Notify Support
No
User Response
Information only; no action is required.
Give documentation feedback