Skip to main content

0EA0D002 : I/O module [arg1] POST timeout.

I/O module [arg1] POST timeout.

The specified I/O module is taking too long to complete the power-on self-test (POST).

Severity​

Warning

Alert Category​

I/O Modules (Warning)

Log Source​

IOMod_02

Serviceable​

Yes

Recoverable​

Yes

Chassis LED that is Lit​

Chassis Check Log

CIM Information​

Prefix:CMM

and ID:0063

SNMP Trap ID​

mmTrapION

Automatically Notify Support​

No

User Response​

The I/O module might still be in the process of starting. Therefore, if no recovery message is displayed within 15 minutes, complete the following steps until the problem is solved:

  1. Attempt to restart the I/O module, and specify the extended POST process to receive a more specific error code.
  2. Perform a service-level reset of the I/O module, which restarts the I/O module.
  3. Reinstall the same level of firmware.
  4. Replace the I/O module.