40050001 : Chassis Management Module [arg1] is not correctly connected to the chassis.
Chassis Management Module [arg1] is not correctly connected to the chassis.
The Chassis Management Module (CMM) is not correctly installed in the chassis, or there is a problem with a connector.
Chassis/System Management (Warning)
Chassis LED that is Lit
SNMP Trap ID
Automatically Notify Support
Complete the following steps until the problem is solved:
- Make sure that the CMM is fully seated in the chassis.
- Remove the CMM from the chassis and check for bent pins on the connectors. If there are bent pins, submit a service request, and do not reinstall the CMM in any CMM bay in the chassis.
- Submit a service request.