Skip to main content

40050002 : Chassis Management Module [arg1] is not correctly connected to the chassis.

Chassis Management Module [arg1] is not correctly connected to the chassis.

The Chassis Management Module (CMM) is not correctly installed in the chassis, or there is a problem with a connector.

Severity​

Warning

Alert Category​

Chassis/System Management (Warning)

Log Source​

SERVPROC

Serviceable​

Yes

Recoverable​

Yes

Chassis LED that is Lit​

None

CIM Information​

Prefix:CMM

and ID:0197

SNMP Trap ID​

mmTrapChassisN

Automatically Notify Support​

No

User Response​

Complete the following steps until the problem is solved:

  1. Make sure that the CMM is fully seated in the chassis.
  2. Remove the CMM from the chassis and check for bent pins on the connectors. If there are bent pins, submit a service request, and do not reinstall the CMM in any CMM bay in the chassis.
  3. Submit a service request.