Skip to main content

FQXSFMA0001M : DIMM [arg1] has been disabled due to an error detected during POST. [arg2]

DIMM [arg1] has been disabled due to an error detected during POST. [arg2]

Parameters​

[arg1] DIMM slot silk label

[arg2] DIMM identifier consists of S/N, FRU and UDI, e.g., "739E68ED-VC10 FRU 0123456"

This message is reported when a DIMM has been disabled.

Severity​

Error

User Action​

Complete the following steps:

  1. Search for other event messages pointing to the same DIMM, and if exist, prioritize resolving them at first.
  2. Reseat the affected DIMM.
  3. Boot to UEFI setup and try to enable DIMM via System Settings->Memory->System Memory Details page (if applicable) and reboot the system to see if the DIMM could be re-enabled successfully.
  4. If the problem persists, update UEFI firmware to the latest version. 5. If the problem persists, collect Service Data logs and contact Lenovo Support. Note: The solution for this error may involve a system board replacement. If TPM encryption has been enabled, back up TPM Encryption Recovery Key.",
    Note
    The solution for this error may involve a system board replacement. If TPM encryption has been enabled, back up TPM Encryption Recovery Key.