Skip to main content

FQXSFPU4088G : Custom default[arg1] is not present, unable to append custom default for UEFI extra setting [arg2].

Custom default[arg1] is not present, unable to append custom default for UEFI extra setting [arg2].

Parameters​

[arg1] UEFI custom default name specified in the exposure config file which is imported by end user. Only one custom default is supported now, then always output “”.

[arg2] UEFI extra setting name specified in the exposure config file which is imported by end user.

This message is reported when the custom default value for the UEFI extra setting failed be appended to the custom default profile because the custom default is not present.

Severity​

Warning

User Action​

Complete the following steps:

  1. If the custom default value is already created, collect service data logs and contact Lenovo Support.
  2. If the custom default value is not created, set the setting to a supported value through out-of-band (OneCLI or Redfish), restart the system to make the changes take effect, and then create custom defaults. (Note: The values of all other settings would be set to custom default values.)