Skip to main content

FQXSFPU4087G : UEFI extra setting [arg1] value [arg2] is invalid in current UEFI [arg3].

UEFI extra setting [arg1] value [arg2] is invalid in current UEFI [arg3].

Parameters​

[arg1] UEFI extra setting name specified in the exposure config file which is imported by end user.

[arg2] UEFI extra setting value which is in Redfish format and specified in the exposure config file imported by end user.

[arg3] UEFI current build ID.

This message is reported when the UEFI extra setting value specified by the exposure config file is invalid in the current UEFI version. The reason might be incorrect hardware configuration or UEFI build mismatch.

Severity​

Warning

User Action​

Complete the following steps:

  1. Check if the current UEFI version is compatible with the UEFI version specified in the exposure config file.
  2. If the current UEFI version does not meet the requirement, update UEFI to the compatible version, and then re-import the exposure config file.
  3. If the value is still invalid, set the setting to a supported value through out-of-band (OneCLI or Redfish) and restart the system to make the changes take effect. Also re-check if the setting value is set successfully or not.
  4. If need a new exposure config file compatible with the current UEFI version, collect Service Data logs and contact Lenovo Support.