XClarity Controller events
When a hardware event is detected by the Lenovo XClarity Controller on the server, the Lenovo XClarity Controller writes that event in the system-event log on the server.
Note
Event identifier (ID) is a unique identifier used to search for XCC events. The event message may have one or more arguments, which could be replaceable text of FRU name or sensor name to identify the failed component. So one XCC event ID could represent a generic event or similar faults that happened on different hardware components. The general way of problem determination is to locate the event by ID, identify the hardware component by message argument if it contains hardware component name, and then perform actions defined in User Action.
Example:
FQXSPCA0017M: Sensor [SensorElementName] has transitioned to critical from a less severe state
FQXSPCA0017M is the event ID.
[SensorElementName] is a sensor variable, indicating the name of hardware component. It can be CPU, PCI adapter, OCP card or chipset. You can find the event by the event ID FQXSPCA0017M and perform actions defined in User Action for the component.
For additional information about the Lenovo XClarity Controller event log, see Viewing Event Logs
section in the XCC documentation compatible with your server at Lenovo XClarity Controller portal page.
For each event code, the following fields are displayed:
- Event identifier
- An identifier that uniquely identifies an event.
- Event description
- The logged message string that appears for an event. When the event string is displayed in the event log, information such as a specific component is displayed. In this documentation, that additional information appears as variables, which include but not limited to the following:
[SensorElementName], [ManagedElementName] , [ProcessorElementName], [ComputerSystemElementName], [PowerSupplyElementName], ...
[arg1], [arg2], [arg3], [arg4], [arg5]...
- Explanation
- Provides additional information to explain why the event occurred.
- Severity
- An indication of the level of concern for the condition. The following severities can be displayed.
Informational. The event was recorded for audit purposes, usually a user action or a change of states that is normal behavior.
Warning. The event is not as severe as an error, but if possible, the condition should be corrected before it becomes an error. It might also be a condition that requires additional monitoring or maintenance.
Error. The event is a failure or critical condition that impairs service or an expected function.
- Alert Category
- Similar events are grouped together in categories. The alert category is in the following format: severity - device, where:
severity is one of the following severity levels:
Critical. A key component in the server is no longer functioning.
Warning. The event might progress to a critical level.
System. The event is the result of a system error or a configuration change.
device is the specific device in the server that caused the event to be generated.
- Serviceable
- Specifies whether user action is required to correct the problem.
- CIM Information
- Provides the prefix of the message ID and the sequence number that is used by the CIM message registry.
- SNMP Trap ID
- The SNMP trap ID that is found in the SNMP alert management information base (MIB).
- Automatically contact Service
- You can configure the Lenovo XClarity Administrator to automatically notify Support (also known as call home) if certain types of errors are encountered. If you have configured this function and this field is set to Yes, Lenovo Support will be notified automatically if the event is generated. While you wait for Lenovo Support to call, you can perform the recommended actions for the event.NoteThis documentation includes references to IBM web sites, products, and information about obtaining service. IBM is Lenovo's preferred service provider for the Lenovo server products.
For more information about enabling Call Home from Lenovo XClarity Administrator, see Setting up automatic problem notification to Lenovo Support (Call Home). In addition, see XCC events that automatically notify Support for a consolidated list of all Lenovo XClarity Controller events that are called home to Lenovo Support.
- User Action
- Indicates what actions you should perform to solve the event. Perform the steps listed in this section in the order shown until the problem is solved. If you cannot solve the problem after performing all steps, contact Lenovo Support.
- XCC events that automatically notify Support
You can configure the XClarity Administrator to automatically notify Support (also known as call home) if certain types of errors are encountered. If you have configured this function, see the table for a list of events that automatically notify Support. - XCC events organized by severity
The following table lists all XCC events, organized by severity (Information, Error, and Warning). - FQXSPBR4000I : Management Controller [arg1]: Configuration restored from a file by user [arg2] from [arg3] at IP address [arg4].
Management Controller [arg1]: Configuration restored from a file by user [arg2] from [arg3] at IP address [arg4]. - FQXSPBR4002I : Management Controller [arg1] Reset was caused by restoring default values.
Management Controller [arg1] Reset was caused by restoring default values. - FQXSPBR4003I : Platform Watchdog Timer expired for [arg1].
Platform Watchdog Timer expired for [arg1]. - FQXSPBR4004I : Server timeouts set by user [arg1]: EnableOSWatchdog=[arg2], OSWatchdogTimout=[arg3], EnableLoaderWatchdog=[arg4], LoaderTimeout=[arg5] from [arg6] at IP address [arg7].
Server timeouts set by user [arg1]: EnableOSWatchdog=[arg2], OSWatchdogTimout=[arg3], EnableLoaderWatchdog=[arg4], LoaderTimeout=[arg5] from [arg6] at IP address [arg7]. - FQXSPBR4005I : Management Controller [arg1]: Configuration saved to a file by user [arg2] from [arg3] at IP address [arg4].
Management Controller [arg1]: Configuration saved to a file by user [arg2] from [arg3] at IP address [arg4]. - FQXSPBR4006I : Management Controller [arg1]: Configuration restoration from a file by user [arg2] completed from [arg3] at IP address [arg4].
Management Controller [arg1]: Configuration restoration from a file by user [arg2] completed from [arg3] at IP address [arg4]. - FQXSPBR4007I : Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to complete from [arg3] at IP address [arg4].
Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to complete from [arg3] at IP address [arg4]. - FQXSPBR4008I : Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to start from [arg3] at IP address [arg4].
Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to start from [arg3] at IP address [arg4]. - FQXSPBR4009I : Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3].
Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3]. - FQXSPBR400AI : Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3] completed.
Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3] completed. - FQXSPBR400BI : Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3] failed to complete.
Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3] failed to complete. - FQXSPBR400CI : Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3] failed to start.
Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3] failed to start. - FQXSPBR400DI : Neighbor group clone configuration was initiated by user [arg1] from [arg2] at IP address [arg3].
Neighbor group clone configuration was initiated by user [arg1] from [arg2] at IP address [arg3]. - FQXSPBR400EI : Neighbor group firmware update was initiated by user [arg1] from [arg2] at IP address [arg3].
Neighbor group firmware update was initiated by user [arg1] from [arg2] at IP address [arg3]. - FQXSPBR400FI : The neighbor group management is [arg1] by user [arg2] from [arg3] at IP address [arg4].
The neighbor group management is [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPCA0000J : Fan [NumericSensorName] going low (lower non-critical) has asserted.
Fan [NumericSensorName] going low (lower non-critical) has asserted. - FQXSPCA0002M : Fan [NumericSensorName] going low (lower critical) has asserted.
Fan [NumericSensorName] going low (lower critical) has asserted. - FQXSPCA0007J : Ambient temperature going high (upper non-critical) has asserted.
Ambient temperature going high (upper non-critical) has asserted. - FQXSPCA0009M : Ambient temperature going high (upper critical) has asserted.
Ambient temperature going high (upper critical) has asserted. - FQXSPCA0011N : Ambient temperature going high (upper non-recoverable) has asserted.
Ambient temperature going high (upper non-recoverable) has asserted. - FQXSPCA0012I : Fan mismatch is recovered.
Fan mismatch is recovered. - FQXSPCA0013I : PCIe [SensorName] overtemperature has transitioned to normal state.
PCIe [SensorName] overtemperature has transitioned to normal state. - FQXSPCA0016M : Fan Mismatch has transitioned to critical from a less severe state.
Fan Mismatch has transitioned to critical from a less severe state. - FQXSPCA0017M : PCIe [SensorName] overtemperature has transitioned to critical from a less severe state.
PCIe [SensorName] overtemperature has transitioned to critical from a less severe state. - FQXSPCA0019N : PCIe [SensorName] overtemperature has transitioned to non-recoverable from a less severe state.
PCIe [SensorName] overtemperature has transitioned to non-recoverable from a less severe state. - FQXSPCA0040N : Liquid is leaking from open loop [CoolingSensorName].
Liquid is leaking from open loop [CoolingSensorName]. - FQXSPCA0041N : Liquid is leaking from closed loop [CoolingSensorName].
Liquid is leaking from closed loop [CoolingSensorName]. - FQXSPCA0042M : Liquid leak detector for [DeviceType] is faulty.
Liquid leak detector for [DeviceType] is faulty. - FQXSPCA0046J : DIMM [DIMMId] temperature going high (upper non-critical) has asserted.
DIMM [DIMMId] temperature going high (upper non-critical) has asserted. - FQXSPCA0047M : DIMM [DIMMId] temperature going high (upper critical) has asserted.
DIMM [DIMMId] temperature going high (upper critical) has asserted. - FQXSPCA0048M : DIMM [DIMMId] temperature going high (upper non-recoverable) has asserted.
DIMM [DIMMId] temperature going high (upper non-recoverable) has asserted. - FQXSPCA0049J : Pump tach [pumpFanIndex] going high (upper non-critical) has asserted.
Pump tach [pumpFanIndex] going high (upper non-critical) has asserted. - FQXSPCA0050M : Pump tach [pumpFanIndex] going high (upper critical) has asserted.
Pump tach [pumpFanIndex] going high (upper critical) has asserted. - FQXSPCA0051N : Pump tach [pumpFanIndex] going high (upper non-recoverable) has asserted.
Pump tach [pumpFanIndex] going high (upper non-recoverable) has asserted. - FQXSPCA0052M : Pump tach [pumpFanIndex] going low (lower critical) has asserted.
Pump tach [pumpFanIndex] going low (lower critical) has asserted. - FQXSPCA2000I : Fan [NumericSensorName] going low (lower non-critical) has deasserted.
Fan [NumericSensorName] going low (lower non-critical) has deasserted. - FQXSPCA2002I : Fan [NumericSensorName] going low (lower critical) has deasserted.
Fan [NumericSensorName] going low (lower critical) has deasserted. - FQXSPCA2007I : Ambient temperature going high (upper non-critical) has deasserted.
Ambient temperature going high (upper non-critical) has deasserted. - FQXSPCA2009I : Ambient temperature going high (upper critical) has deasserted.
Ambient temperature going high (upper critical) has deasserted. - FQXSPCA2011I : Ambient temperature going high (upper non-recoverable) has deasserted.
Ambient temperature going high (upper non-recoverable) has deasserted. - FQXSPCA2016I : Fan Mismatch has transitioned to a less severe state from critical.
Fan Mismatch has transitioned to a less severe state from critical. - FQXSPCA2017I : PCIe [SensorName] overtemperature has transitioned to a less severe state from critical.
PCIe [SensorName] overtemperature has transitioned to a less severe state from critical. - FQXSPCA2019I : PCIe [SensorName] overtemperature has deasserted the transition to non-recoverable from a less severe state.
PCIe [SensorName] overtemperature has deasserted the transition to non-recoverable from a less severe state. - FQXSPCA2042I : Liquid leak detector for [DeviceType] is recovered.
Liquid leak detector for [DeviceType] is recovered. - FQXSPCA2046I : DIMM [DIMMId] temperature going high (upper non-critical) has deasserted.
DIMM [DIMMId] temperature going high (upper non-critical) has deasserted. - FQXSPCA2047I : DIMM [DIMMId] temperature going high (upper critical) has deasserted.
DIMM [DIMMId] temperature going high (upper critical) has deasserted. - FQXSPCA2048I : DIMM [DIMMId] temperature going high (upper non-recoverable) has deasserted.
DIMM [DIMMId] temperature going high (upper non-recoverable) has deasserted. - FQXSPCA2049I : Pump tach [pumpFanIndex] going high (upper non-critical) has deasserted.
Pump tach [pumpFanIndex] going high (upper non-critical) has deasserted. - FQXSPCA2050I : Pump tach [pumpFanIndex] going high (upper critical) has deasserted.
Pump tach [pumpFanIndex] going high (upper critical) has deasserted. - FQXSPCA2051I : Pump tach [pumpFanIndex] going high (upper non-recoverable) has deasserted.
Pump tach [pumpFanIndex] going high (upper non-recoverable) has deasserted. - FQXSPCA2052I : Pump tach [pumpFanIndex] going low (lower critical) has deasserted.
Pump tach [pumpFanIndex] going low (lower critical) has deasserted. - FQXSPCN4000I : Serial Redirection set by user [arg1]: Mode=[arg2], BaudRate=[arg3], StopBits=[arg4], Parity=[arg5], SessionTerminateSequence=[arg6] from [arg7] at IP address [arg8].
Serial Redirection set by user [arg1]: Mode=[arg2], BaudRate=[arg3], StopBits=[arg4], Parity=[arg5], SessionTerminateSequence=[arg6] from [arg7] at IP address [arg8]. - FQXSPCN4002I : User [arg1] has terminated an active CLI console session from [arg2] at IP address [arg3].
User [arg1] has terminated an active CLI console session from [arg2] at IP address [arg3]. - FQXSPCN4004I : User [arg1] has created an active [arg2] console session from [arg3] at IP address [arg4].
User [arg1] has created an active [arg2] console session from [arg3] at IP address [arg4]. - FQXSPCN4005I : A [arg1] console session is timeout.
A [arg1] console session is timeout. - FQXSPCN4006I : User [arg1] has terminated an active IPMI console session from [arg2] at IP address [arg3].
User [arg1] has terminated an active IPMI console session from [arg2] at IP address [arg3]. - FQXSPCP0001G : Device [DeviceName] mismatch with the system.
Device [DeviceName] mismatch with the system. - FQXSPDM4000I : Inventory data changed for device [arg1], new device data hash=[arg2], new master data hash=[arg3].
Inventory data changed for device [arg1], new device data hash=[arg2], new master data hash=[arg3]. - FQXSPDM4003I : TKLM servers set by user [arg1]: TKLMServer1=[arg2] Port=[arg3], TKLMServer2=[arg4] Port=[arg5], TKLMServer3=[arg6] Port=[arg7], TKLMServer4=[arg8] Port=[arg9] from [arg10] at IP address [arg11].
TKLM servers set by user [arg1]: TKLMServer1=[arg2] Port=[arg3], TKLMServer2=[arg4] Port=[arg5], TKLMServer3=[arg6] Port=[arg7], TKLMServer4=[arg8] Port=[arg9] from [arg10] at IP address [arg11]. - FQXSPDM4004I : TKLM servers device group set by user [arg1]: TKLMServerDeviceGroup=[arg2] from [arg3] at IP address [arg4].
TKLM servers device group set by user [arg1]: TKLMServerDeviceGroup=[arg2] from [arg3] at IP address [arg4]. - FQXSPDM4005I : User [arg1] has generated a new encryption key pair and installed a self-signed certificate for the TKLM client from [arg2] at IP address [arg3].
User [arg1] has generated a new encryption key pair and installed a self-signed certificate for the TKLM client from [arg2] at IP address [arg3]. - FQXSPDM4006I : User [arg1] has generated a new encryption key and certificate signing request for the TKLM client from [arg2] at IP address [arg3].
User [arg1] has generated a new encryption key and certificate signing request for the TKLM client from [arg2] at IP address [arg3]. - FQXSPDM4007I : User [arg1] has imported a signed certificate for the TKLM client from [arg2] from [arg3] at IP address [arg4].
User [arg1] has imported a signed certificate for the TKLM client from [arg2] from [arg3] at IP address [arg4]. - FQXSPDM4008I : User [arg1] has imported a server certificate for the TKLM server from [arg2] at IP address [arg3].
User [arg1] has imported a server certificate for the TKLM server from [arg2] at IP address [arg3]. - FQXSPDM4009I : User [arg1] has [arg2] file [arg3] from [arg4] at IP address [arg5].
User [arg1] has [arg2] file [arg3] from [arg4] at IP address [arg5]. - FQXSPDM4011I : EKMS server protocol set by user [arg1]: TKLMServerProtocol=[arg2] from [arg3] at IP address [arg4].
EKMS server protocol set by user [arg1]: TKLMServerProtocol=[arg2] from [arg3] at IP address [arg4]. - FQXSPDM4012I : User [arg1] has changed the polling configuration for the key management server: Polling enabled=[arg2], interval=[arg3].
User [arg1] has changed the polling configuration for the key management server: Polling enabled=[arg2], interval=[arg3]. - FQXSPDM4013I : User [arg1] has changed the caching configuration for the key management server: Caching enabled=[arg2], timeout=[arg3].
User [arg1] has changed the caching configuration for the key management server: Caching enabled=[arg2], timeout=[arg3]. - FQXSPEA0003J : Link down is detected on port [PCIPortNumber] of the PCIe device [PCIDeviceName].
Link down is detected on port [PCIPortNumber] of the PCIe device [PCIDeviceName]. - FQXSPEA2003I : Link up is detected on port [[1]] of the PCIe device [[2]] in slot [[3]].
Link up is detected on port [[1]] of the PCIe device [[2]] in slot [[3]]. - FQXSPEM4000I : The [arg1] on system [arg2] cleared by user [arg3] from [arg4] at IP address [arg5].
The [arg1] on system [arg2] cleared by user [arg3] from [arg4] at IP address [arg5]. - FQXSPEM4003I : LED [arg1] state changed to [arg2] by [arg3] from [arg4] at IP address [arg5].
LED [arg1] state changed to [arg2] by [arg3] from [arg4] at IP address [arg5]. - FQXSPEM4004I : SNMP [arg1] enabled by user [arg2] from [arg3] at IP address [arg4].
SNMP [arg1] enabled by user [arg2] from [arg3] at IP address [arg4]. - FQXSPEM4005I : SNMP [arg1] disabled by user [arg2] from [arg3] at IP address [arg4].
SNMP [arg1] disabled by user [arg2] from [arg3] at IP address [arg4]. - FQXSPEM4006I : Alert Configuration Global Event Notification set by user [arg1]: RetryLimit=[arg2], RetryInterval=[arg3], EntryInterval=[arg4] from [arg5] at IP address [arg6].
Alert Configuration Global Event Notification set by user [arg1]: RetryLimit=[arg2], RetryInterval=[arg3], EntryInterval=[arg4] from [arg5] at IP address [arg6]. - FQXSPEM4007I : Alert Recipient Number [arg1] updated: Name=[arg2], DeliveryMethod=[arg3], Address=[arg4], IncludeLog=[arg5], Enabled=[arg6], EnabledAlerts=[arg7] by user [arg8] from [arg9] at IP address [arg10].
Alert Recipient Number [arg1] updated: Name=[arg2], DeliveryMethod=[arg3], Address=[arg4], IncludeLog=[arg5], Enabled=[arg6], EnabledAlerts=[arg7] by user [arg8] from [arg9] at IP address [arg10]. - FQXSPEM4008I : SNMP Traps enabled by user [arg1]: EnabledAlerts=[arg2] from [arg3] at IP address [arg4].
SNMP Traps enabled by user [arg1]: EnabledAlerts=[arg2] from [arg3] at IP address [arg4]. - FQXSPEM4009I : The UEFI Definitions have been changed.
The UEFI Definitions have been changed. - FQXSPEM4011I : XCC failed to log previous event [arg1].
XCC failed to log previous event [arg1]. - FQXSPEM4012I : User [arg1] made system [arg2] Encapsulation lite Mode from [arg3] at IP address [arg4].
User [arg1] made system [arg2] Encapsulation lite Mode from [arg3] at IP address [arg4]. - FQXSPEM4028I : The port [arg1] of PCIe device [arg2] has link [arg3].
The port [arg1] of PCIe device [arg2] has link [arg3]. - FQXSPEM4031I : SSD wear [arg1] threshold setting is changed from [arg2] to [arg3] by user [arg4] from [arg5] at IP address [arg6].
SSD wear [arg1] threshold setting is changed from [arg2] to [arg3] by user [arg4] from [arg5] at IP address [arg6]. - FQXSPEM4041I : The SmartNIC in slot [arg1] encountered boot timeout.
The SmartNIC in slot [arg1] encountered boot timeout. - FQXSPEM4042I : The SmartNIC in slot [arg1] went through a crash dump.
The SmartNIC in slot [arg1] went through a crash dump. - FQXSPEM4043I : A [arg1] failure has been detected and need [arg2] to recover.
A [arg1] failure has been detected and need [arg2] to recover. - FQXSPFC4000I : The bare metal connection process has been started.
The bare metal connection process has been started. - FQXSPFC4001I : The bare metal update application reports a status of [arg1].
The bare metal update application reports a status of [arg1]. - FQXSPFW0001N : Firmware BIOS (ROM) corruption was detected on system [ComputerSystemName] during POST.
Firmware BIOS (ROM) corruption was detected on system [ComputerSystemName] during POST. - FQXSPFW0004I : UEFI advanced memory test is running.
UEFI advanced memory test is running. - FQXSPFW0005I : UEFI advanced memory test is completed.
UEFI advanced memory test is completed. - FQXSPFW0006I : UEFI advanced memory test is interrupted.
UEFI advanced memory test is interrupted. - FQXSPFW0007I : UEFI advanced memory test encountered a hang.
UEFI advanced memory test encountered a hang. - FQXSPFW2001I : The System [ComputerSystemName] has detected a POST Error deassertion - firmware(BIOS) ROM corruption detected.
The System [ComputerSystemName] has detected a POST Error deassertion - firmware(BIOS) ROM corruption detected. - FQXSPIO0000I : The connector [PhysicalConnectorName] has been detected as present or connected.
The connector [PhysicalConnectorName] has been detected as present or connected. - FQXSPIO0004L : A bus timeout has occurred on bus [BusName].
A bus timeout has occurred on bus [BusName]. - FQXSPIO0005N : An I/O Channel Check NMI has occurred on system [ComputerSystemName].
An I/O Channel Check NMI has occurred on system [ComputerSystemName]. - FQXSPIO0006N : A software NMI has occurred on system [ComputerSystemName].
A software NMI has occurred on system [ComputerSystemName]. - FQXSPIO0010I : A Correctable Bus Error has occurred on bus [BusName].
A Correctable Bus Error has occurred on bus [BusName]. - FQXSPIO0011N : An Uncorrectable Error has occurred on PCIs.
An Uncorrectable Error has occurred on PCIs. - FQXSPIO0013N : A Fatal Bus Error has occurred on bus [BusName].
A Fatal Bus Error has occurred on bus [BusName]. - FQXSPIO0014J : Bus [BusName] is operating in a degraded state.
Bus [BusName] is operating in a degraded state. - FQXSPIO0027M : Fault in M2 adapter(serial number: [SerialNumber]) on system [ComputerSystemName].
Fault in M2 adapter(serial number: [SerialNumber]) on system [ComputerSystemName]. - FQXSPIO0031M : PCIe devices have fault.
PCIe devices have fault. - FQXSPIO0032I : Device [DeviceType] [DeviceIndex] is installed.
Device [DeviceType] [DeviceIndex] is installed. - FQXSPIO0033I : Device [DeviceType] [DeviceIndex] is uninstalled
Device [DeviceType] [DeviceIndex] is uninstalled - FQXSPIO0034I : Connector [ConnectorName] is linked to [DeviceType] [DeviceIndex].
Connector [ConnectorName] is linked to [DeviceType] [DeviceIndex]. - FQXSPIO0035G : [DeviceName] is installed in wrong location.
[DeviceName] is installed in wrong location. - FQXSPIO0036G : Signal cable and power cable are misconnected for [DeviceName]. Should connect signal cable [RiserOrBPConnectorName1] to [MCIOorMXIOConnectName1], [RiserOrBPConnectorName2] to [MCIOorMXIOConnectName2].
Signal cable and power cable are misconnected for [DeviceName]. Should connect signal cable [RiserOrBPConnectorName1] to [MCIOorMXIOConnectName1], [RiserOrBPConnectorName2] to [MCIOorMXIOConnectName2]. - FQXSPIO0037G : Signal cable and power cable are misconnected for [DeviceName]. Should connect signal cable [MCIOorMXIOConnectName].
Signal cable and power cable are misconnected for [DeviceName]. Should connect signal cable [MCIOorMXIOConnectName]. - FQXSPIO2000J : The connector [PhysicalConnectorName] has been disconnected.
The connector [PhysicalConnectorName] has been disconnected. - FQXSPIO2004I : Bus [BusName] has recovered from a bus timeout.
Bus [BusName] has recovered from a bus timeout. - FQXSPIO2005I : System [ComputerSystemName] has recovered from I/O Channel Check NMI.
System [ComputerSystemName] has recovered from I/O Channel Check NMI. - FQXSPIO2006I : System [ComputerSystemName] has recovered from software NMI.
System [ComputerSystemName] has recovered from software NMI. - FQXSPIO2010I : Bus [BusName] has recovered from a Correctable Bus Error.
Bus [BusName] has recovered from a Correctable Bus Error. - FQXSPIO2011I : PCIs has recovered from an Uncorrectable Error.
PCIs has recovered from an Uncorrectable Error. - FQXSPIO2013I : Bus [BusName] has recovered from a Fatal Bus Error.
Bus [BusName] has recovered from a Fatal Bus Error. - FQXSPIO2014I : Bus [BusName] is no longer operating in a degraded state.
Bus [BusName] is no longer operating in a degraded state. - FQXSPIO2027I : Fault condition removed in M2 adapter(serial number: [SerialNumber]) on system [ComputerSystemName].
Fault condition removed in M2 adapter(serial number: [SerialNumber]) on system [ComputerSystemName]. - FQXSPIO2031I : Fault condition removed All PCIe devices on system [ComputerSystemName].
Fault condition removed All PCIe devices on system [ComputerSystemName]. - FQXSPMA0010J : DIMM [DIMMId] on system [MemoryName] is throttled.
DIMM [DIMMId] on system [MemoryName] is throttled. - FQXSPMA0012M : An Over-Temperature Condition has been detected on the DIMM [DIMMId] on system [MemoryName].
An Over-Temperature Condition has been detected on the DIMM [DIMMId] on system [MemoryName]. - FQXSPMA0025I : BMC LAN failover from dedicate to shared.
BMC LAN failover from dedicate to shared. - FQXSPMA0039G : DIMM [DIMMID] is disabled.
DIMM [DIMMID] is disabled. - FQXSPMA0130N : Memory PMIC [MemoryPMICGroup] has transitioned to non-recoverable.
Memory PMIC [MemoryPMICGroup] has transitioned to non-recoverable. - FQXSPMA2010I : DIMM [DIMMId] on system [MemoryName] is no longer throttled.
DIMM [DIMMId] on system [MemoryName] is no longer throttled. - FQXSPMA2012I : An Over-Temperature Condition has been removed on the dimm [DIMMId] on system [MemoryName].
An Over-Temperature Condition has been removed on the dimm [DIMMId] on system [MemoryName]. - FQXSPMA2025I : BMC LAN recovers back from shared to dedicate.
BMC LAN recovers back from shared to dedicate. - FQXSPMA2037I : DIMMs has recovered from an Uncorrectable Error.
DIMMs has recovered from an Uncorrectable Error. - FQXSPMA2039I : DIMM [DIMMID] is enabled.
DIMM [DIMMID] is enabled. - FQXSPNM4000I : Management Controller [arg1] Network Initialization Complete.
Management Controller [arg1] Network Initialization Complete. - FQXSPNM4001I : Ethernet Data Rate modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
Ethernet Data Rate modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPNM4002I : Ethernet Duplex setting modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
Ethernet Duplex setting modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPNM4003I : Ethernet MTU setting modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
Ethernet MTU setting modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPNM4004I : Ethernet locally administered MAC address modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
Ethernet locally administered MAC address modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPNM4005I : Ethernet interface [arg1] by user [arg2] from [arg3] at IP address [arg4].
Ethernet interface [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPNM4006I : Hostname set to [arg1] by user [arg2] from [arg3] at IP address [arg4].
Hostname set to [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPNM4010I : DHCP[[arg1]] failure, no IP address assigned.
DHCP[[arg1]] failure, no IP address assigned. - FQXSPNM4011I : ENET[[arg1]] DHCP-HSTN=[arg2], DN=[arg3], IP@=[arg4], SN=[arg5], GW@=[arg6], DNS1@=[arg7].
ENET[[arg1]] DHCP-HSTN=[arg2], DN=[arg3], IP@=[arg4], SN=[arg5], GW@=[arg6], DNS1@=[arg7]. - FQXSPNM4012I : ENET[[arg1]] IP-Cfg:HstName=[arg2], IP@=[arg3] ,NetMsk=[arg4], GW@=[arg5].
ENET[[arg1]] IP-Cfg:HstName=[arg2], IP@=[arg3] ,NetMsk=[arg4], GW@=[arg5]. - FQXSPNM4013I : LAN: Ethernet[[arg1]] interface is no longer active.
LAN: Ethernet[[arg1]] interface is no longer active. - FQXSPNM4014I : LAN: Ethernet[[arg1]] interface is now active.
LAN: Ethernet[[arg1]] interface is now active. - FQXSPNM4016I : Domain name set to [arg1] by user [arg2] from [arg3] at IP address [arg4].
Domain name set to [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPNM4017I : Domain Source changed to [arg1] by user [arg2] from [arg3] at IP address [arg4].
Domain Source changed to [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPNM4018I : DDNS setting changed to [arg1] by user [arg2] from [arg3] at IP address [arg4].
DDNS setting changed to [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPNM4019I : DDNS registration successful. The domain name is [arg1].
DDNS registration successful. The domain name is [arg1]. - FQXSPNM4020I : IPv6 enabled by user [arg1] from [arg2] at IP address [arg3].
IPv6 enabled by user [arg1] from [arg2] at IP address [arg3]. - FQXSPNM4021I : IPv6 disabled by user [arg1] from [arg2] at IP address [arg3].
IPv6 disabled by user [arg1] from [arg2] at IP address [arg3]. - FQXSPNM4022I : IPv6 static IP configuration enabled by user [arg1] from [arg2] at IP address [arg3].
IPv6 static IP configuration enabled by user [arg1] from [arg2] at IP address [arg3]. - FQXSPNM4023I : IPv6 DHCP enabled by user [arg1] from [arg2] at IP address [arg3].
IPv6 DHCP enabled by user [arg1] from [arg2] at IP address [arg3]. - FQXSPNM4024I : IPv6 stateless auto-configuration enabled by user [arg1] from [arg2] at IP address [arg3].
IPv6 stateless auto-configuration enabled by user [arg1] from [arg2] at IP address [arg3]. - FQXSPNM4025I : IPv6 static IP configuration disabled by user [arg1] from [arg2] at IP address [arg3].
IPv6 static IP configuration disabled by user [arg1] from [arg2] at IP address [arg3]. - FQXSPNM4026I : IPv6 DHCP disabled by user [arg1] from [arg2] at IP address [arg3].
IPv6 DHCP disabled by user [arg1] from [arg2] at IP address [arg3]. - FQXSPNM4027I : IPv6 stateless auto-configuration disabled by user [arg1] from [arg2] at IP address [arg3].
IPv6 stateless auto-configuration disabled by user [arg1] from [arg2] at IP address [arg3]. - FQXSPNM4028I : ENET[[arg1]] IPv6-LinkLocal:HstName=[arg2], IP@=[arg3] ,Pref=[arg4].
ENET[[arg1]] IPv6-LinkLocal:HstName=[arg2], IP@=[arg3] ,Pref=[arg4]. - FQXSPNM4029I : ENET[[arg1]] IPv6-Static:HstName=[arg2], IP@=[arg3] ,Pref=[arg4], GW@=[arg5].
ENET[[arg1]] IPv6-Static:HstName=[arg2], IP@=[arg3] ,Pref=[arg4], GW@=[arg5]. - FQXSPNM4030I : ENET[[arg1]] DHCPv6-HSTN=[arg2], DN=[arg3], IP@=[arg4], Pref=[arg5], DNS1@=[arg6].
ENET[[arg1]] DHCPv6-HSTN=[arg2], DN=[arg3], IP@=[arg4], Pref=[arg5], DNS1@=[arg6]. - FQXSPNM4031I : IPv6 static address of network interface modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
IPv6 static address of network interface modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPNM4034I : SSH port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
SSH port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPNM4035I : Web-HTTP port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
Web-HTTP port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPNM4036I : Web-HTTPS port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
Web-HTTPS port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPNM4039I : SNMP Agent port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
SNMP Agent port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPNM4040I : SNMP Traps port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
SNMP Traps port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPNM4041I : Syslog port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
Syslog port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPNM4042I : Remote Presence port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
Remote Presence port number changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPNM4043I : SMTP Server set by user [arg1] to [arg2]:[arg3] from [arg4] at IP address [arg5].
SMTP Server set by user [arg1] to [arg2]:[arg3] from [arg4] at IP address [arg5]. - FQXSPNM4045I : DNS servers set by user [arg1]: UseAdditionalServers=[arg2], PreferredDNStype=[arg3], IPv4Server1=[arg4], IPv4Server2=[arg5], IPv4Server3=[arg6], IPv6Server1=[arg7], IPv6Server2=[arg8], IPv6Server3=[arg9] from [arg10] at IP address [arg11].
DNS servers set by user [arg1]: UseAdditionalServers=[arg2], PreferredDNStype=[arg3], IPv4Server1=[arg4], IPv4Server2=[arg5], IPv4Server3=[arg6], IPv6Server1=[arg7], IPv6Server2=[arg8], IPv6Server3=[arg9] from [arg10] at IP address [arg11]. - FQXSPNM4046I : LAN over USB [arg1] by user [arg2] from [arg3] at IP address [arg4].
LAN over USB [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPNM4047I : LAN over USB Port Forwarding set by user [arg1]: ExternalPort=[arg2], USB-LAN port=[arg3] from [arg4] at IP address [arg5].
LAN over USB Port Forwarding set by user [arg1]: ExternalPort=[arg2], USB-LAN port=[arg3] from [arg4] at IP address [arg5]. - FQXSPNM4048I : PXE boot requested by user [arg1] from [arg2] at IP address [arg3].
PXE boot requested by user [arg1] from [arg2] at IP address [arg3]. - FQXSPNM4049I : User [arg1] has initiated a TKLM Server Connection Test to check connectivity to server [arg2] from [arg3] at IP address [arg4].
User [arg1] has initiated a TKLM Server Connection Test to check connectivity to server [arg2] from [arg3] at IP address [arg4]. - FQXSPNM4051I : User [arg1] has set the SMTP Server reverse-path to [arg2] from [arg3] at IP address [arg4].
User [arg1] has set the SMTP Server reverse-path to [arg2] from [arg3] at IP address [arg4]. - FQXSPNM4053I : DNS discovery of Lenovo XClarity Administrator has been [arg1] by user [arg2] from [arg3] at IP address [arg4].
DNS discovery of Lenovo XClarity Administrator has been [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPNM4054I : The hostname from DHCP is [arg1] by user [arg2] from [arg3] at IP address [arg4].
The hostname from DHCP is [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPNM4055I : The hostname from DHCP is invalid.
The hostname from DHCP is invalid. - FQXSPNM4056I : The NTP server address [arg1] is invalid.
The NTP server address [arg1] is invalid. - FQXSPNM4057I : Security: IP address: [arg1] had [arg2] login failures, it will be blocked to access for [arg3] minutes.
Security: IP address: [arg1] had [arg2] login failures, it will be blocked to access for [arg3] minutes. - FQXSPNM4058I : IP address of network interface [arg1] is modified from [arg2] to [arg3] by user [arg4] from [arg5] at IP address [arg6].
IP address of network interface [arg1] is modified from [arg2] to [arg3] by user [arg4] from [arg5] at IP address [arg6]. - FQXSPNM4059I : IP subnet mask of network interface [arg1] is modified from [arg2] to [arg3] by user [arg4] from [arg5] at IP address [arg6].
IP subnet mask of network interface [arg1] is modified from [arg2] to [arg3] by user [arg4] from [arg5] at IP address [arg6]. - FQXSPNM4060I : IP address of default gateway of network interface [arg1] is modified from [arg2] to [arg3] by user [arg4] from [arg5] at IP address [arg6].
IP address of default gateway of network interface [arg1] is modified from [arg2] to [arg3] by user [arg4] from [arg5] at IP address [arg6]. - FQXSPOS4000I : OS Watchdog response [arg1] by [arg2] from [arg3] at IP address [arg4].
OS Watchdog response [arg1] by [arg2] from [arg3] at IP address [arg4]. - FQXSPOS4001I : Watchdog [arg1] Screen Capture Occurred.
Watchdog [arg1] Screen Capture Occurred. - FQXSPOS4002I : Watchdog [arg1] Failed to Capture Screen.
Watchdog [arg1] Failed to Capture Screen. - FQXSPOS4003I : Platform Watchdog Timer expired for [arg1].
Platform Watchdog Timer expired for [arg1]. - FQXSPOS4004I : Operating System status has changed to [arg1].
Operating System status has changed to [arg1]. - FQXSPOS4005I : Host Power-On password changed by user [arg1] from [arg2] at IP address [arg3].
Host Power-On password changed by user [arg1] from [arg2] at IP address [arg3]. - FQXSPOS4006I : Host Power-On password cleared by user [arg1] from [arg2] at IP address [arg3].
Host Power-On password cleared by user [arg1] from [arg2] at IP address [arg3]. - FQXSPOS4007I : Host Admin password changed by user [arg1] from [arg2] at IP address [arg3].
Host Admin password changed by user [arg1] from [arg2] at IP address [arg3]. - FQXSPOS4008I : Host Admin password cleared by user [arg1] from [arg2] at IP address [arg3].
Host Admin password cleared by user [arg1] from [arg2] at IP address [arg3]. - FQXSPOS4009I : OS Crash Video Captured.
OS Crash Video Captured. - FQXSPOS4010I : OS Crash Video Capture Failed.
OS Crash Video Capture Failed. - FQXSPOS4011I : OS failure screen capture with hardware error is [arg1] by user [arg2] from [arg3] at IP address [arg4].
OS failure screen capture with hardware error is [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPOS4012I : POST watchdog Screen Capture Occurred.
POST watchdog Screen Capture Occurred. - FQXSPPP4000I : Attempting to [arg1] server [arg2] by user [arg3] from [arg4] at IP address [arg5].
Attempting to [arg1] server [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPPP4001I : Server Power Off Delay set to [arg1] by user [arg2] from [arg3] at IP address [arg4].
Server Power Off Delay set to [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPPP4002I : Server [arg1] scheduled for [arg2] at [arg3] by user [arg4] from [arg5] at IP address [arg6].
Server [arg1] scheduled for [arg2] at [arg3] by user [arg4] from [arg5] at IP address [arg6]. - FQXSPPP4003I : Server [arg1] scheduled for every [arg2] at [arg3] by user [arg4] from [arg5] at IP address [arg6].
Server [arg1] scheduled for every [arg2] at [arg3] by user [arg4] from [arg5] at IP address [arg6]. - FQXSPPP4004I : Server [arg1] [arg2] cleared by user [arg3] from [arg4] at IP address [arg5].
Server [arg1] [arg2] cleared by user [arg3] from [arg4] at IP address [arg5]. - FQXSPPP4005I : The power cap value changed from [arg1] watts to [arg2] watts by user [arg3] from [arg4] at IP address [arg5].
The power cap value changed from [arg1] watts to [arg2] watts by user [arg3] from [arg4] at IP address [arg5]. - FQXSPPP4009I : The measured power value exceeded the power cap value.
The measured power value exceeded the power cap value. - FQXSPPP4011I : Power capping was activated by user [arg1] from [arg2] at IP address [arg3].
Power capping was activated by user [arg1] from [arg2] at IP address [arg3]. - FQXSPPP4012I : Power capping was deactivated by user [arg1] from [arg2] at IP address [arg3].
Power capping was deactivated by user [arg1] from [arg2] at IP address [arg3]. - FQXSPPP4020I : The measured power value has returned below the power cap value.
The measured power value has returned below the power cap value. - FQXSPPP4022I : The server was restarted for an unknown reason.
The server was restarted for an unknown reason. - FQXSPPP4023I : The server is restarted by chassis control command.
The server is restarted by chassis control command. - FQXSPPP4024I : The server was reset via push button.
The server was reset via push button. - FQXSPPP4025I : The server was powered-up via power push button.
The server was powered-up via power push button. - FQXSPPP4026I : The server was restarted when the watchdog expired.
The server was restarted when the watchdog expired. - FQXSPPP4027I : The server was restarted for OEM reason.
The server was restarted for OEM reason. - FQXSPPP4028I : The server was automatically powered on because the power restore policy is set to always on.
The server was automatically powered on because the power restore policy is set to always on. - FQXSPPP4029I : The server was automatically powered on because the power restore policy is set to restore previous power state.
The server was automatically powered on because the power restore policy is set to restore previous power state. - FQXSPPP4030I : The server was reset via Platform Event Filter.
The server was reset via Platform Event Filter. - FQXSPPP4031I : The server was power-cycled via Platform Event Filter.
The server was power-cycled via Platform Event Filter. - FQXSPPP4032I : The server was soft reset.
The server was soft reset. - FQXSPPP4033I : The server was powered up via Real Time Clock (scheduled power on).
The server was powered up via Real Time Clock (scheduled power on). - FQXSPPP4034I : The server was powered off for an unknown reason.
The server was powered off for an unknown reason. - FQXSPPP4035I : The server was powered off by chassis control command.
The server was powered off by chassis control command. - FQXSPPP4036I : The server was powered off via push button.
The server was powered off via push button. - FQXSPPP4037I : The server was powered off when the watchdog expired.
The server was powered off when the watchdog expired. - FQXSPPP4038I : The server stayed powered off because the power restore policy is set to always off.
The server stayed powered off because the power restore policy is set to always off. - FQXSPPP4039I : The server stayed powered off because the power restore policy is set to restore previous power state.
The server stayed powered off because the power restore policy is set to restore previous power state. - FQXSPPP4040I : The server was powered off via Platform Event Filter.
The server was powered off via Platform Event Filter. - FQXSPPP4041I : The server was powered off via Real Time Clock (scheduled power off).
The server was powered off via Real Time Clock (scheduled power off). - FQXSPPP4042I : Management Controller [arg1] reset was initiated due to Power-On-Reset.
Management Controller [arg1] reset was initiated due to Power-On-Reset. - FQXSPPP4044I : Management Controller [arg1] reset was initiated by CMM.
Management Controller [arg1] reset was initiated by CMM. - FQXSPPP4047I : Management Controller [arg1] reset was initiated by user [arg2] from [arg3] at IP address [arg4].
Management Controller [arg1] reset was initiated by user [arg2] from [arg3] at IP address [arg4]. - FQXSPPP4048I : Attempting to AC power cycle server [arg1] by user [arg2] from [arg3] at IP address [arg4].
Attempting to AC power cycle server [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPPP4049I : Management Controller [arg1] reset was initiated by Front Panel.
Management Controller [arg1] reset was initiated by Front Panel. - FQXSPPP4050I : Management Controller [arg1] reset was initiated to activate PFR Firmware.
Management Controller [arg1] reset was initiated to activate PFR Firmware. - FQXSPPP4054I : Unbalanced PSU config is detected, system is using less node PSU capacity.
Unbalanced PSU config is detected, system is using less node PSU capacity. - FQXSPPR0000I : [BackplaneName] detected as present.
[BackplaneName] detected as present. - FQXSPPR0003I : Front Panel detected as present.
Front Panel detected as present. - FQXSPPR0004I : TPM module detected as present.
TPM module detected as present. - FQXSPPR2001I : [BackplaneName] detected as absent.
[BackplaneName] detected as absent. - FQXSPPR2003I : Front Panel detected as absent.
Front Panel detected as absent. - FQXSPPR2004I : TPM module detected as absent.
TPM module detected as absent. - FQXSPPU0001N : An Over-Temperature Condition has been detected on Processor [ProcessorId].
An Over-Temperature Condition has been detected on Processor [ProcessorId]. - FQXSPPU0002G : Processor [ProcessorId] is operating in a Degraded State.
Processor [ProcessorId] is operating in a Degraded State. - FQXSPPU0007N : CPU voltage mismatch detected on [ProcessorName].
CPU voltage mismatch detected on [ProcessorName]. - FQXSPPU0009N : Processor [ProcessorId] has a Configuration Mismatch.
Processor [ProcessorId] has a Configuration Mismatch. - FQXSPPU0010G : Processor [ProcessorId] is operating in a Degraded State due to [ElementSource].
Processor [ProcessorId] is operating in a Degraded State due to [ElementSource]. - FQXSPPU0015G : CPU feature mismatch is detected.
CPU feature mismatch is detected. - FQXSPPU0016N : An Uncorrectable Error has occurred on CPUs.
An Uncorrectable Error has occurred on CPUs. - FQXSPPU0017N : A hard fault has occurred on processor [ProcessorId].
A hard fault has occurred on processor [ProcessorId]. - FQXSPPU2001I : An Over-Temperature Condition has been removed on Processor [ProcessorId].
An Over-Temperature Condition has been removed on Processor [ProcessorId]. - FQXSPPU2002I : The Processor [ProcessorId] is no longer operating in a Degraded State.
The Processor [ProcessorId] is no longer operating in a Degraded State. - FQXSPPU2007I : The System [ComputerSystemName] has detected a POST Error deassertion - CPU voltage mismatch.
The System [ComputerSystemName] has detected a POST Error deassertion - CPU voltage mismatch. - FQXSPPU2009I : Processor [ProcessorId] has Recovered from a Configuration Mismatch.
Processor [ProcessorId] has Recovered from a Configuration Mismatch. - FQXSPPU2015I : CPU feature mismatch is recovered.
CPU feature mismatch is recovered. - FQXSPPU2016I : CPUs has recovered from an Uncorrectable Error.
CPUs has recovered from an Uncorrectable Error. - FQXSPPU2017I : Processor [ProcessorId] has recovered from a hard fault.
Processor [ProcessorId] has recovered from a hard fault. - FQXSPPW0001I : Power supply [PowerSupplyId] has been added.
Power supply [PowerSupplyId] has been added. - FQXSPPW0002L : Power supply [PowerSupplyId] has Failed.
Power supply [PowerSupplyId] has Failed. - FQXSPPW0003G : Failure predicted on power supply [PowerSupplyId].
Failure predicted on power supply [PowerSupplyId]. - FQXSPPW0003L : Power supply [PowerSupplyId] in the enclosure/chassis (MTM-SN: [MachineSerialNumber])has failed.
Power supply [PowerSupplyId] in the enclosure/chassis (MTM-SN: [MachineSerialNumber])has failed. - FQXSPPW0004I : The input to power supply [PowerSupplyId] has been lost or fallen out of range.
The input to power supply [PowerSupplyId] has been lost or fallen out of range. - FQXSPPW0005I : Power supply [PowerSupplyId] is operating in an Input State that is out of range.
Power supply [PowerSupplyId] is operating in an Input State that is out of range. - FQXSPPW0006I : Power supply [PowerSupplyId] has lost input.
Power supply [PowerSupplyId] has lost input. - FQXSPPW0007I : Power supply [PowerSupplyId] in the enclosure/chassis (MTM-SN: [MachineSerialNumber])has lost input.
Power supply [PowerSupplyId] in the enclosure/chassis (MTM-SN: [MachineSerialNumber])has lost input. - FQXSPPW0007L : Power supply [PowerSupplyId] has a Configuration Mismatch.
Power supply [PowerSupplyId] has a Configuration Mismatch. - FQXSPPW0008I : Host power has been turned off.
Host power has been turned off. - FQXSPPW0009I : Host power has been Power Cycled.
Host power has been Power Cycled. - FQXSPPW0011I : Host power has lost power.
Host power has lost power. - FQXSPPW0031J : CMOS battery voltage going low (lower non-critical) has asserted.
CMOS battery voltage going low (lower non-critical) has asserted. - FQXSPPW0035M : [SysBrdVol] going low (lower critical) has asserted.
[SysBrdVol] going low (lower critical) has asserted. - FQXSPPW0047M : [SysBrdVol] going high (upper critical) has asserted.
[SysBrdVol] going high (upper critical) has asserted. - FQXSPPW0054I : PSU Mismatch has transitioned to normal state.
PSU Mismatch has transitioned to normal state. - FQXSPPW0055I : SysBrd voltage fault has transitioned to normal state.
SysBrd voltage fault has transitioned to normal state. - FQXSPPW0057J : PSU [SensorName] prediction fault failure has transitioned from normal to non-critical state.
PSU [SensorName] prediction fault failure has transitioned from normal to non-critical state. - FQXSPPW0061M : PSU [SensorName] failure has transitioned to critical from a less severe state.
PSU [SensorName] failure has transitioned to critical from a less severe state. - FQXSPPW0062M : PSU mismatch has transitioned to critical from a less severe state.
PSU mismatch has transitioned to critical from a less severe state. - FQXSPPW0063M : SysBrd voltage fault has transitioned to critical from a less severe state.
SysBrd voltage fault has transitioned to critical from a less severe state. - FQXSPPW0091I : Redundancy Power Resource has been restored.
Redundancy Power Resource has been restored. - FQXSPPW0101J : Redundancy Degraded for Power Resource has asserted.
Redundancy Degraded for Power Resource has asserted. - FQXSPPW0104J : Non-redundant:Sufficient Resources from Redundancy Degraded or Fully Redundant for Power Resource has asserted.
Non-redundant:Sufficient Resources from Redundancy Degraded or Fully Redundant for Power Resource has asserted. - FQXSPPW0110M : Non-redundant:Insufficient Resources for Power Resource has asserted.
Non-redundant:Insufficient Resources for Power Resource has asserted. - FQXSPPW0123M : PSU [SensorName] input failure has transitioned to critical from a less severe state.
PSU [SensorName] input failure has transitioned to critical from a less severe state. - FQXSPPW0129I : PSU [SensorName] failure has transitioned to normal state.
PSU [SensorName] failure has transitioned to normal state. - FQXSPPW0129N : CPU [ProcessorId] [VRName] has transitioned to non-recoverable.
CPU [ProcessorId] [VRName] has transitioned to non-recoverable. - FQXSPPW0130I : PSU [SensorName] prediction fault failure has transitioned to normal state.
PSU [SensorName] prediction fault failure has transitioned to normal state. - FQXSPPW0131I : PSU [SensorName] input failure has transitioned to normal state.
PSU [SensorName] input failure has transitioned to normal state. - FQXSPPW0131N : Peripheral device [DeviceName] powergood has transitioned to non-recoverable.
Peripheral device [DeviceName] powergood has transitioned to non-recoverable. - FQXSPPW0132N : Fan [FanGroup] powergood has transitioned to non-recoverable.
Fan [FanGroup] powergood has transitioned to non-recoverable. - FQXSPPW0133N : MB AUX powergood has transitioned to non-recoverable.
MB AUX powergood has transitioned to non-recoverable. - FQXSPPW2001I : Power supply [PowerSupplyId] has been removed.
Power supply [PowerSupplyId] has been removed. - FQXSPPW2002I : Power supply [PowerSupplyId] has returned to OK status.
Power supply [PowerSupplyId] has returned to OK status. - FQXSPPW2003I : Failure no longer predicted on power supply [PowerSupplyId].
Failure no longer predicted on power supply [PowerSupplyId]. - FQXSPPW2004I : Power supply [PowerSupplyId] has returned to a Normal Input State.
Power supply [PowerSupplyId] has returned to a Normal Input State. - FQXSPPW2005I : Power supply [PowerSupplyId] has returned to a Normal Input State.
Power supply [PowerSupplyId] has returned to a Normal Input State. - FQXSPPW2006I : Power supply [PowerSupplyId] has returned to a Normal Input State.
Power supply [PowerSupplyId] has returned to a Normal Input State. - FQXSPPW2007I : Power supply [PowerSupplyId] Configuration is OK.
Power supply [PowerSupplyId] Configuration is OK. - FQXSPPW2008I : Host power has been turned on.
Host power has been turned on. - FQXSPPW2011I : Host power was restored.
Host power was restored. - FQXSPPW2015I : Power supply [PowerSupplyId] in the enclosure/chassis (MTM-SN: [MachineSerialNumber])has returned to OK status.
Power supply [PowerSupplyId] in the enclosure/chassis (MTM-SN: [MachineSerialNumber])has returned to OK status. - FQXSPPW2017I : Power supply [PowerSupplyId] in the enclosure/chassis (MTM-SN: [MachineSerialNumber])has returned to a normal input state.
Power supply [PowerSupplyId] in the enclosure/chassis (MTM-SN: [MachineSerialNumber])has returned to a normal input state. - FQXSPPW2031I : CMOS battery voltage going low (lower non-critical) has deasserted.
CMOS battery voltage going low (lower non-critical) has deasserted. - FQXSPPW2035I : [SysBrdVol] going low (lower critical) has deasserted.
[SysBrdVol] going low (lower critical) has deasserted. - FQXSPPW2047I : [SysBrdVol] going high (upper critical) has deasserted.
[SysBrdVol] going high (upper critical) has deasserted. - FQXSPPW2057I : PSU [SensorName] prediction fault failure has deasserted the transition from normal to non-critical state.
PSU [SensorName] prediction fault failure has deasserted the transition from normal to non-critical state. - FQXSPPW2061I : PSU [SensorName] failure has transitioned to a less severe state from critical.
PSU [SensorName] failure has transitioned to a less severe state from critical. - FQXSPPW2062I : PSU Mismatch has transitioned to a less severe state from critical.
PSU Mismatch has transitioned to a less severe state from critical. - FQXSPPW2063I : SysBrd voltage fault has transitioned to a less severe state from critical.
SysBrd voltage fault has transitioned to a less severe state from critical. - FQXSPPW2101I : Redundancy Degraded for Power Resource has deasserted.
Redundancy Degraded for Power Resource has deasserted. - FQXSPPW2104I : Non-redundant:Sufficient Resources from Redundancy Degraded or Fully Redundant for Power Resource has deasserted.
Non-redundant:Sufficient Resources from Redundancy Degraded or Fully Redundant for Power Resource has deasserted. - FQXSPPW2110I : Non-redundant:Insufficient Resources for Power Resource has deasserted.
Non-redundant:Insufficient Resources for Power Resource has deasserted. - FQXSPPW2123I : PSU [SensorName] input failure has transitioned to a less severe state from critical.
PSU [SensorName] input failure has transitioned to a less severe state from critical. - FQXSPSD0000I : The [DriveName] has been added.
The [DriveName] has been added. - FQXSPSD0001L : The [DriveName] has a fault.
The [DriveName] has a fault. - FQXSPSD0002G : Failure Predicted on [DriveName].
Failure Predicted on [DriveName]. - FQXSPSD0002L : Drive [DriveLocation] in the enclosure/chassis(MTM-SN: [MachineSerialNumber]) has a fault.
Drive [DriveLocation] in the enclosure/chassis(MTM-SN: [MachineSerialNumber]) has a fault. - FQXSPSD0003G : Failure Predicted on drive [DriveLocation] in the enclosure/chassis (MTM-SN: [MachineSerialNumber]).
Failure Predicted on drive [DriveLocation] in the enclosure/chassis (MTM-SN: [MachineSerialNumber]). - FQXSPSD0003I : Hot Spare enabled with drive [DriveLocation].
Hot Spare enabled with drive [DriveLocation]. - FQXSPSD0005I : Hot Spare enabled for drive [DriveLocation] in the enclosure/chassis (MTM-SN: [MachineSerialNumber]).
Hot Spare enabled for drive [DriveLocation] in the enclosure/chassis (MTM-SN: [MachineSerialNumber]). - FQXSPSD0007I : The [DriveName] is rebuilding.
The [DriveName] is rebuilding. - FQXSPSD0008I : Array rebuild in progress on drive [DriveLocation] in the enclosure/chassis (MTM-S/N: [MachineSerialNumber]).
Array rebuild in progress on drive [DriveLocation] in the enclosure/chassis (MTM-S/N: [MachineSerialNumber]). - FQXSPSD2000I : The [DriveName] has been removed from unit [PhysicalPackageName].
The [DriveName] has been removed from unit [PhysicalPackageName]. - FQXSPSD2001I : The [DriveName] has recovered from a fault.
The [DriveName] has recovered from a fault. - FQXSPSD2002I : Failure no longer Predicted on [DriveName].
Failure no longer Predicted on [DriveName]. - FQXSPSD2003I : Hot Spare disabled with drive [DriveLocation].
Hot Spare disabled with drive [DriveLocation]. - FQXSPSD2007I : Rebuild completed on [DriveName].
Rebuild completed on [DriveName]. - FQXSPSD2008I : Drive [DriveLocation] in the enclosure/chassis(MTM-SN: [MachineSerialNumber]) has recovered from a fault.
Drive [DriveLocation] in the enclosure/chassis(MTM-SN: [MachineSerialNumber]) has recovered from a fault. - FQXSPSD2011I : Failure no longer Predicted on drive [DriveLocation] in the enclosure/chassis (MTM-S/N: [MachineSerialNumber]).
Failure no longer Predicted on drive [DriveLocation] in the enclosure/chassis (MTM-S/N: [MachineSerialNumber]). - FQXSPSD2012I : Hot Spare disabled for drive [DriveLocation] in the enclosure/chassis (MTM-SN: [MachineSerialNumber]).
Hot Spare disabled for drive [DriveLocation] in the enclosure/chassis (MTM-SN: [MachineSerialNumber]). - FQXSPSD2015I : Array rebuild completed on drive [DriveLocation] in the enclosure/chassis (MTM-S/N: [MachineSerialNumber]).
Array rebuild completed on drive [DriveLocation] in the enclosure/chassis (MTM-S/N: [MachineSerialNumber]). - FQXSPSE0000F : The Chassis [ComputerSystemName] was opened.
The Chassis [ComputerSystemName] was opened. - FQXSPSE0010J : System Guard detected inventory mismatch with trusted snapshot.
System Guard detected inventory mismatch with trusted snapshot. - FQXSPSE2000I : The Chassis [ComputerSystemName] was closed.
The Chassis [ComputerSystemName] was closed. - FQXSPSE2010I : System guard changed to compliant status.
System guard changed to compliant status. - FQXSPSE4000I : Certificate Authority [arg1] has detected a [arg2] Certificate Error.
Certificate Authority [arg1] has detected a [arg2] Certificate Error. - FQXSPSE4001I : Remote Login Successful. Login ID: [arg1] using [arg2] from [arg3] at IP address [arg4].
Remote Login Successful. Login ID: [arg1] using [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4002I : Security: Userid: [arg1] using [arg2] had [arg3] login failures from WEB client at IP address [arg4].
Security: Userid: [arg1] using [arg2] had [arg3] login failures from WEB client at IP address [arg4]. - FQXSPSE4003I : Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3].
Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3]. - FQXSPSE4004I : Remote access attempt failed. Invalid userid or password received. Userid is [arg1] from WEB browser at IP address [arg2].
Remote access attempt failed. Invalid userid or password received. Userid is [arg1] from WEB browser at IP address [arg2]. - FQXSPSE4006I : XCC detected an invalid SSL certificate in the Management Controller [arg1].
XCC detected an invalid SSL certificate in the Management Controller [arg1]. - FQXSPSE4007I : Security: Userid: [arg1] using [arg2] had [arg3] login failures from an SSH client at IP address [arg4].
Security: Userid: [arg1] using [arg2] had [arg3] login failures from an SSH client at IP address [arg4]. - FQXSPSE4008I : SNMPv1 [arg1] set by user [arg2]: Name=[arg3], AccessType=[arg4], Address=[arg5] from [arg6] at IP address [arg7].
SNMPv1 [arg1] set by user [arg2]: Name=[arg3], AccessType=[arg4], Address=[arg5] from [arg6] at IP address [arg7]. - FQXSPSE4009I : LDAP Server configuration set by user [arg1]: AuthenticatonOnly=[arg2], UseDNS=[arg3], ForestName=[arg4], DomainName=[arg5], Server1=[arg6], Server2=[arg7], Server3=[arg8], Server4=[arg9] from [arg10] at IP address [arg11].
LDAP Server configuration set by user [arg1]: AuthenticatonOnly=[arg2], UseDNS=[arg3], ForestName=[arg4], DomainName=[arg5], Server1=[arg6], Server2=[arg7], Server3=[arg8], Server4=[arg9] from [arg10] at IP address [arg11]. - FQXSPSE4010I : LDAP set by user [arg1]: Type=[arg2], RootDN=[arg3], UserSearchAttribute=[arg4], BindingMethod=[arg5], GroupFilter=[arg6], GroupSearchAttribute=[arg7], LoginAttribute=[arg8] from [arg9] at IP address [arg10].
LDAP set by user [arg1]: Type=[arg2], RootDN=[arg3], UserSearchAttribute=[arg4], BindingMethod=[arg5], GroupFilter=[arg6], GroupSearchAttribute=[arg7], LoginAttribute=[arg8] from [arg9] at IP address [arg10]. - FQXSPSE4011I : Secure Web services (HTTPS) [arg1] by user [arg2] from [arg3] at IP address [arg4].
Secure Web services (HTTPS) [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4013I : Secure LDAP [arg1] by user [arg2] from [arg3] at IP address [arg4].
Secure LDAP [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4014I : SSH [arg1] by user [arg2] from [arg3] at IP address [arg4].
SSH [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4015I : Global Login General Settings set by user [arg1]: AuthenticationMethod=[arg2], LockoutPeriod=[arg3], SessionTimeout=[arg4] from [arg5] at IP address [arg6].
Global Login General Settings set by user [arg1]: AuthenticationMethod=[arg2], LockoutPeriod=[arg3], SessionTimeout=[arg4] from [arg5] at IP address [arg6]. - FQXSPSE4016I : Global Login Account Security set by user [arg1]: PasswordRequired=[arg2], PasswordExpirationPeriod=[arg3], MinimumPasswordReuseCycle=[arg4], MinimumPasswordLength=[arg5], MinimumPasswordChangeInterval=[arg6], MaxmumLoginFailures=[arg7], LockoutAfterMaxFailures=[arg8] from [arg9] at IP address [arg10].
Global Login Account Security set by user [arg1]: PasswordRequired=[arg2], PasswordExpirationPeriod=[arg3], MinimumPasswordReuseCycle=[arg4], MinimumPasswordLength=[arg5], MinimumPasswordChangeInterval=[arg6], MaxmumLoginFailures=[arg7], LockoutAfterMaxFailures=[arg8] from [arg9] at IP address [arg10]. - FQXSPSE4022I : User [arg1] for SNMPv3 agent set: AuthenticationProtocol=[arg2], PrivacyProtocol=[arg3], AccessType=[arg4] by user [arg5] from [arg6] at IP address [arg7].
User [arg1] for SNMPv3 agent set: AuthenticationProtocol=[arg2], PrivacyProtocol=[arg3], AccessType=[arg4] by user [arg5] from [arg6] at IP address [arg7]. - FQXSPSE4023I : SSH Client key added for user [arg1] by user [arg2] from [arg3] at IP address [arg4].
SSH Client key added for user [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4024I : SSH Client key imported for user [arg1] from [arg2] by user [arg3] from [arg4] at IP address [arg5].
SSH Client key imported for user [arg1] from [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4025I : SSH Client key removed from user [arg1] by user [arg2] from [arg3] at IP address [arg4].
SSH Client key removed from user [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4028I : Security: Userid: [arg1] had [arg2] login failures from IPMI client at IP address [arg3].
Security: Userid: [arg1] had [arg2] login failures from IPMI client at IP address [arg3]. - FQXSPSE4029I : Security: Userid: [arg1] had [arg2] login failures from SNMP client at IP address [arg3].
Security: Userid: [arg1] had [arg2] login failures from SNMP client at IP address [arg3]. - FQXSPSE4032I : Login ID: [arg1] from [arg2] at IP address [arg3] has logged off.
Login ID: [arg1] from [arg2] at IP address [arg3] has logged off. - FQXSPSE4034I : User [arg1] has removed a certificate from [arg2] at IP address [arg3].
User [arg1] has removed a certificate from [arg2] at IP address [arg3]. - FQXSPSE4035I : A certificate has been revoked.
A certificate has been revoked. - FQXSPSE4036I : The [arg1] certificate is expired and has been removed.
The [arg1] certificate is expired and has been removed. - FQXSPSE4038I : Minimum TLS level modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
Minimum TLS level modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4039I : Temporary user account [arg1] is created by inband tool.
Temporary user account [arg1] is created by inband tool. - FQXSPSE4040I : Temporary user account [arg1] expires.
Temporary user account [arg1] expires. - FQXSPSE4042I : The third-party password function [arg1] by user [arg2] from [arg3] at IP address [arg4].
The third-party password function [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4043I : Retrieving the third-party password [arg1] by user [arg2] from [arg3] at IP address [arg4].
Retrieving the third-party password [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4044I : User [arg1] third-party hashed password has been [arg2] by user [arg3] from [arg4] at IP address [arg5].
User [arg1] third-party hashed password has been [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4045I : The Salt of user [arg1] third-party password has been [arg2] by user [arg3] from [arg4] at IP address [arg5].
The Salt of user [arg1] third-party password has been [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4046I : The third-party password of the user [arg1] has been retrieved by user [arg2] from [arg3] at IP address [arg4].
The third-party password of the user [arg1] has been retrieved by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4047I : Role [arg1] is [arg2] and assigned with custom privileges [arg3] by user [arg4] from [arg5] at IP address [arg6].
Role [arg1] is [arg2] and assigned with custom privileges [arg3] by user [arg4] from [arg5] at IP address [arg6]. - FQXSPSE4048I : Role [arg1] is removed by user [arg2] from [arg3] at IP address [arg4].
Role [arg1] is removed by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4049I : Role [arg1] is assigned to user [arg2] by user [arg3] from [arg4] at IP address [arg5].
Role [arg1] is assigned to user [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4050I : [arg1] sent IPMI command from [arg2], raw data: [arg3][arg4][arg5].
[arg1] sent IPMI command from [arg2], raw data: [arg3][arg4][arg5]. - FQXSPSE4051I : Management Controller [arg1] joined the neighbor group [arg2] by user [arg3] from [arg4] at IP address [arg5].
Management Controller [arg1] joined the neighbor group [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4052I : The password of neighbor group [arg1] is modified by [arg2] [arg3] from [arg4] at IP address [arg5].
The password of neighbor group [arg1] is modified by [arg2] [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4053I : Management Controller [arg1] left the neighbor group [arg2] by user [arg3] from [arg4] at IP address [arg5].
Management Controller [arg1] left the neighbor group [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4054I : IPMI SEL wrapping mode is [arg1] by user [arg2] from [arg3] at IP address [arg4].
IPMI SEL wrapping mode is [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4055I : SED encryption is enabled by user [arg1] from [arg2] at IP address [arg3].
SED encryption is enabled by user [arg1] from [arg2] at IP address [arg3]. - FQXSPSE4056I : SED AK is [arg1] by user [arg2] from [arg3] at IP address [arg4].
SED AK is [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4057I : User [arg1] created by user [arg2] from [arg3] at IP address [arg4].
User [arg1] created by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4058I : User [arg1] removed by user [arg2] from [arg3] at IP address [arg4].
User [arg1] removed by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4059I : User [arg1] password modified by user [arg2] from [arg3] at IP address [arg4].
User [arg1] password modified by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4060I : User [arg1] role set to [arg2] by user [arg3] from [arg4] at IP address [arg5].
User [arg1] role set to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4061I : User [arg1] custom privileges set: [arg2] by user [arg3] from [arg4] at IP address [arg5].
User [arg1] custom privileges set: [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4062I : The system guard snapshot is captured by user [arg1] from [arg2] at IP address [arg3].
The system guard snapshot is captured by user [arg1] from [arg2] at IP address [arg3]. - FQXSPSE4063I : The system guard configuration is updated: status=[arg1], hardware inventory=[arg2] and action=[arg3] by user [arg4] from [arg5] at IP address [arg6].
The system guard configuration is updated: status=[arg1], hardware inventory=[arg2] and action=[arg3] by user [arg4] from [arg5] at IP address [arg6]. - FQXSPSE4064I : SNMPv3 engine ID is changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
SNMPv3 engine ID is changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4065I : SFTP [arg1] by user [arg2] from [arg3] at IP address [arg4].
SFTP [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4066I : Security mode is modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
Security mode is modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4067I : User [arg1] accessible interfaces is set to [arg2] by user [arg3] from [arg4] at IP address [arg5].
User [arg1] accessible interfaces is set to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4068I : Security: Userid: [arg1] using [arg2] had [arg3] login failures from Redfish client at IP address [arg4].
Security: Userid: [arg1] using [arg2] had [arg3] login failures from Redfish client at IP address [arg4]. - FQXSPSE4069I : LDAP set by user [arg1]: RootDN=[arg2], UIDSearchAttribute=[arg3], BindingMethod=[arg4], TargetName=[arg5], GroupFilter=[arg6], GroupAttribute=[arg7], LoginAttribute=[arg8] from [arg9] at IP address [arg10].
LDAP set by user [arg1]: RootDN=[arg2], UIDSearchAttribute=[arg3], BindingMethod=[arg4], TargetName=[arg5], GroupFilter=[arg6], GroupAttribute=[arg7], LoginAttribute=[arg8] from [arg9] at IP address [arg10]. - FQXSPSE4074I : Security mode downgrades because the XCC2 Platinum Upgrade key is expired or deleted.
Security mode downgrades because the XCC2 Platinum Upgrade key is expired or deleted. - FQXSPSE4079I : The Operator role is [arg1] to contain Remote Console Access permission by user [arg2] from [arg3] at IP address [arg4].
The Operator role is [arg1] to contain Remote Console Access permission by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4080I : The user [arg1] attempts to clear CMOS from [arg2] at IP address [arg3].
The user [arg1] attempts to clear CMOS from [arg2] at IP address [arg3]. - FQXSPSE4081I : BMC returns the valid local cached key to UEFI for SED drives.
BMC returns the valid local cached key to UEFI for SED drives. - FQXSPSE4082I : Remote key management server is inaccessible.
Remote key management server is inaccessible. - FQXSPSE4083I : The local cached key has expired and destroyed it.
The local cached key has expired and destroyed it. - FQXSPSE4084I : Periodic connection to remote key management server succeeded.
Periodic connection to remote key management server succeeded. - FQXSPSE4085I : Periodic connection to remote key management server failed.
Periodic connection to remote key management server failed. - FQXSPSE4091I : SNMPv2 [arg1] set by user [arg2]: Name=[arg3], AccessType=[arg4], Address=[arg5].
SNMPv2 [arg1] set by user [arg2]: Name=[arg3], AccessType=[arg4], Address=[arg5]. - FQXSPSE4092I : SNMPv1 Community-1 set by user [arg1]: Name=[arg2], AccessType=trap from [arg3] at IP address [arg4].
SNMPv1 Community-1 set by user [arg1]: Name=[arg2], AccessType=trap from [arg3] at IP address [arg4]. - FQXSPSE4093I : SNMPv1 Community-1 set by user [arg1]: address=[arg2] from [arg3] at IP address [arg4].
SNMPv1 Community-1 set by user [arg1]: address=[arg2] from [arg3] at IP address [arg4]. - FQXSPSE4094I : SNMPv2 Community-1 set by user [arg1]: Name=[arg2], AccessType=trap from [arg3] at IP address [arg4].
SNMPv2 Community-1 set by user [arg1]: Name=[arg2], AccessType=trap from [arg3] at IP address [arg4]. - FQXSPSE4095I : SNMPv2 Community-1 set by user [arg1]: address=[arg2] from [arg3] at IP address [arg4].
SNMPv2 Community-1 set by user [arg1]: address=[arg2] from [arg3] at IP address [arg4]. - FQXSPSE4096I : User [arg1] for SNMPv3 trap set: AuthenticationProtocol=[arg2], PrivacyProtocol=[arg3] by user [arg4] from [arg5] at IP address [arg6].
User [arg1] for SNMPv3 trap set: AuthenticationProtocol=[arg2], PrivacyProtocol=[arg3] by user [arg4] from [arg5] at IP address [arg6]. - FQXSPSE4097I : User [arg1] for SNMPv3 trap is deleted by user [arg2] from [arg3] at IP address [arg4].
User [arg1] for SNMPv3 trap is deleted by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4129I : Security: Userid: [arg1] failed to login from SNMP client at IP address [arg2].
Security: Userid: [arg1] failed to login from SNMP client at IP address [arg2]. - FQXSPSS0012G : [System] cannot detect [DeviceName].
[System] cannot detect [DeviceName]. - FQXSPSS4000I : Management Controller Test Alert Generated by [arg1] from [arg2] at IP address [arg3].
Management Controller Test Alert Generated by [arg1] from [arg2] at IP address [arg3]. - FQXSPSS4001I : Server General Settings set by user [arg1]: Name=[arg2], Contact=[arg3], Location=[arg4], Room=[arg5], RackID=[arg6], Rack U-position=[arg7], Address=[arg8] from [arg9] at IP address [arg10].
Server General Settings set by user [arg1]: Name=[arg2], Contact=[arg3], Location=[arg4], Room=[arg5], RackID=[arg6], Rack U-position=[arg7], Address=[arg8] from [arg9] at IP address [arg10]. - FQXSPSS4002I : License key for [arg1] added by user [arg2] from [arg3] at IP address [arg4].
License key for [arg1] added by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSS4003I : License key for [arg1] removed by user [arg2] from [arg3] at IP address [arg4].
License key for [arg1] removed by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSS4004I : Test Call Home Generated by user [arg1] from [arg2] at IP address [arg3].
Test Call Home Generated by user [arg1] from [arg2] at IP address [arg3]. - FQXSPSS4006I : Call Home to [arg1] failed to complete: [arg2].
Call Home to [arg1] failed to complete: [arg2]. - FQXSPSS4007I : The BMC functionality tier is changed from [arg1] to [arg2].
The BMC functionality tier is changed from [arg1] to [arg2]. - FQXSPSS4008I : The [arg1] setting has been changed to [arg2] by user [arg3] from [arg4] at IP address [arg5].
The [arg1] setting has been changed to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSS4009I : System enters LXPM maintenance mode.
System enters LXPM maintenance mode. - FQXSPSS4010I : Test Audit Log generated by user [arg1] from [arg2] at IP address [arg3].
Test Audit Log generated by user [arg1] from [arg2] at IP address [arg3]. - FQXSPSS4011I : Fan speed boost setting is changed from [arg1] to [arg2].
Fan speed boost setting is changed from [arg1] to [arg2]. - FQXSPTR4001I : Date and Time set by user [arg1]: Date=[arg2], Time-[arg3], DST Auto-adjust=[arg4], Timezone=[arg5] from [arg6] at IP address [arg7].
Date and Time set by user [arg1]: Date=[arg2], Time-[arg3], DST Auto-adjust=[arg4], Timezone=[arg5] from [arg6] at IP address [arg7]. - FQXSPTR4002I : Synchronize time setting by user [arg1]: Mode=Sync with NTP Server, NTPServerHost1=[arg2],NTPServerHost2=[arg3],NTPServerHost3=[arg4],NTPServerHost4=[arg5],NTPUpdateFrequency=[arg6] from [arg7] at IP address [arg8].
Synchronize time setting by user [arg1]: Mode=Sync with NTP Server, NTPServerHost1=[arg2],NTPServerHost2=[arg3],NTPServerHost3=[arg4],NTPServerHost4=[arg5],NTPUpdateFrequency=[arg6] from [arg7] at IP address [arg8]. - FQXSPTR4003I : Synchronize time setting by user [arg1]: Mode=Sync with server clock from [arg2] at IP address [arg3].
Synchronize time setting by user [arg1]: Mode=Sync with server clock from [arg2] at IP address [arg3]. - FQXSPUN0009G : BMC firmware corruption is detected.
BMC firmware corruption is detected. - FQXSPUN0026I : Low Security Jumper is enabled.
Low Security Jumper is enabled. - FQXSPUN0048I : The RAID controller in PCI slot [PCILocation] in optimal status.
The RAID controller in PCI slot [PCILocation] in optimal status. - FQXSPUN0049J : The RAID controller in PCIe slot [PCILocation] is in warning status. At least one physical drive is in unconfigured bad state.
The RAID controller in PCIe slot [PCILocation] is in warning status. At least one physical drive is in unconfigured bad state. - FQXSPUN0050M : The RAID controller in PCIe slot [PCILocation] is in critical state. Volume [VolumeID] is offline.
The RAID controller in PCIe slot [PCILocation] is in critical state. Volume [VolumeID] is offline. - FQXSPUN0051J : The RAID controller in PCIe slot [PCILocation] has asserted a warning. Foreign configuration is detected.
The RAID controller in PCIe slot [PCILocation] has asserted a warning. Foreign configuration is detected. - FQXSPUN0053M : The RAID controller in PCIe slot [PCILocation] is in critical status. At least one physical drive is failed.
The RAID controller in PCIe slot [PCILocation] is in critical status. At least one physical drive is failed. - FQXSPUN0054M : The RAID controller in PCIe slot [PCILocation] is in critical status. Volume [VolumeID] is degraded.
The RAID controller in PCIe slot [PCILocation] is in critical status. Volume [VolumeID] is degraded. - FQXSPUN0055M : The RAID controller in PCIe slot [PCILocation] is in critical state. Battery is in non-optimal state.
The RAID controller in PCIe slot [PCILocation] is in critical state. Battery is in non-optimal state. - FQXSPUN0057I : The RAID controller in PCI slot [PCILocation] does not have a battery.
The RAID controller in PCI slot [PCILocation] does not have a battery. - FQXSPUN0058J : The remaining life of [DriveName] is lower than the warning threshold ([ThresholdValue]).
The remaining life of [DriveName] is lower than the warning threshold ([ThresholdValue]). - FQXSPUN0059J : RoT attestation has detected a failure.
RoT attestation has detected a failure. - FQXSPUN0060G : RoT mismatch has asserted.
RoT mismatch has asserted. - FQXSPUN0061I : System Maintenance Mode has asserted.
System Maintenance Mode has asserted. - FQXSPUN0062I : SMI Timeout has asserted.
SMI Timeout has asserted. - FQXSPUN0063I : PSU heavy load has asserted.
PSU heavy load has asserted. - FQXSPUN0065J : UEFI firmware authentication failure is detected.
UEFI firmware authentication failure is detected. - FQXSPUN0067M : Failed to automatically recover UEFI firmware from authentication failure.
Failed to automatically recover UEFI firmware from authentication failure. - FQXSPUN0068M : [DriveName] Mismatch has transitioned to critical from a less severe state.
[DriveName] Mismatch has transitioned to critical from a less severe state. - FQXSPUN0069M : The remaining life of [DriveName] is lower than the critical threshold ([ThresholdValue]).
The remaining life of [DriveName] is lower than the critical threshold ([ThresholdValue]). - FQXSPUN2012I : BMC firmware corrupted has deasserted.
BMC firmware corrupted has deasserted. - FQXSPUN2026I : Low Security Jumper is disabled.
Low Security Jumper is disabled. - FQXSPUN2049I : The RAID controller in PCI slot [PCILocation] is no longer in warning status.
The RAID controller in PCI slot [PCILocation] is no longer in warning status. - FQXSPUN2050I : The RAID controller in PCI slot [PCILocation] is no longer in critical status.
The RAID controller in PCI slot [PCILocation] is no longer in critical status. - FQXSPUN2057I : The RAID controller in PCI slot [PCILocation] has a battery now.
The RAID controller in PCI slot [PCILocation] has a battery now. - FQXSPUN2058I : The remaining life for all SSDs is above threshold [ThresholdValue].
The remaining life for all SSDs is above threshold [ThresholdValue]. - FQXSPUN2061I : System Maintenance Mode has deasserted.
System Maintenance Mode has deasserted. - FQXSPUN2062I : SMI Timeout has deasserted.
SMI Timeout has deasserted. - FQXSPUN2063I : PSU heavy load has deasserted.
PSU heavy load has deasserted. - FQXSPUN2065I : UEFI firmware is automatically recovered from authentication failure.
UEFI firmware is automatically recovered from authentication failure. - FQXSPUN2067I : UEFI firmware is manually recovered from authentication failure.
UEFI firmware is manually recovered from authentication failure. - FQXSPUN2068I : [DriveName] Mismatch has transitioned to a less severe state from critical.
[DriveName] Mismatch has transitioned to a less severe state from critical. - FQXSPUP0002I : A firmware or software change occurred on system [ComputerSystemName].
A firmware or software change occurred on system [ComputerSystemName]. - FQXSPUP0007L : BMC primary firmware is corrupted, auto fail over to backup.
BMC primary firmware is corrupted, auto fail over to backup. - FQXSPUP4003I : [arg1] firmware mismatch internal to system [arg2]. Please attempt to flash the [arg3] firmware.
[arg1] firmware mismatch internal to system [arg2]. Please attempt to flash the [arg3] firmware. - FQXSPUP4006I : Auto promote primary XCC to backup is [arg1] by user [arg2] from [arg3] at IP address [arg4].
Auto promote primary XCC to backup is [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPUP4007I : Violation access to XCC SPI flash is detected and isolated.
Violation access to XCC SPI flash is detected and isolated. - FQXSPUP4008I : Violation access to UEFI SPI flash is detected and isolated.
Violation access to UEFI SPI flash is detected and isolated. - FQXSPUP4009I : Please ensure that the system is flashed with the correct [arg1] firmware. The Management Controller is unable to match the firmware to the server.
Please ensure that the system is flashed with the correct [arg1] firmware. The Management Controller is unable to match the firmware to the server. - FQXSPUP4010I : Flash [arg1] of [arg2] from [arg3] succeeded for user [arg4].
Flash [arg1] of [arg2] from [arg3] succeeded for user [arg4]. - FQXSPUP4011I : Flash [arg1] of [arg2] from [arg3] failed for user [arg4].
Flash [arg1] of [arg2] from [arg3] failed for user [arg4]. - FQXSPWD0000I : Watchdog Timer expired for [WatchdogName].
Watchdog Timer expired for [WatchdogName]. - FQXSPWD0001I : Reboot of system [ComputerSystemName] initiated by watchdog [WatchdogName].
Reboot of system [ComputerSystemName] initiated by watchdog [WatchdogName]. - FQXSPWD0002I : Powering off system [ComputerSystemName] initiated by watchdog [WatchdogName].
Powering off system [ComputerSystemName] initiated by watchdog [WatchdogName]. - FQXSPWD0003I : Power cycle of system [ComputerSystemName] initiated by watchdog [WatchdogName].
Power cycle of system [ComputerSystemName] initiated by watchdog [WatchdogName]. - FQXSPWD0004I : Watchdog Timer interrupt occurred for [WatchdogName].
Watchdog Timer interrupt occurred for [WatchdogName].
Give documentation feedback