Skip to main content

FQXSPBR4008I : Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to start from [arg3] at IP address [arg4].

Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to start from [arg3] at IP address [arg4].

This message is for the use case where a user restores a management controller configuration from a file and the restoration fails to start.

Severity​

Error

Alert Category​

System - Other

Serviceable​

No

CIM Information​

Prefix:IMM

and ID:0138

SNMP Trap ID​

22

Automatically Notify Support​

No

User Action​

Complete the following steps until the problem is solved:

  1. Turn off the server and disconnect it from the power source. You must disconnect the server from AC power to reset the BMC.
  2. After 45 seconds, reconnect the server to the power source and turn on the server.
  3. Retry the operation.
  4. If the problem persists, collect service data log.
  5. Contact Lenovo Support.