FQXSPMA0012M : An Over-Temperature Condition has been detected on the DIMM [DIMMId] on system [MemoryName].
An Over-Temperature Condition has been detected on the DIMM [DIMMId] on system [MemoryName].
This message is for the use case when an implementation has detected an over-temperature condition for memory that has been detected.
Severity
Error
Alert Category
Critical - Temperature
Serviceable
Yes
SNMP Trap ID
0
Automatically Notify Support
No
User Action
Complete the following steps until the problem is solved:
- Check the event log of system management module and xClarity Controller for any fan or cooling related issues.
- Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place and correctly installed.
- Make sure that the room temperature is within operating specifications.
- Make sure that the DIMM and Drive baffles are in place if applicable.
- If the problem persists, collect service data log.
- Contact Lenovo Support.
Give documentation feedback